Models
>
DV316BEW
DV316BEW Amana Dryer - Overview
Sections of the DV316BEW
[Viewing 7 of 7]Keep searches simple, eg. "belt" or "pump".
Light Bulb - 10W
PartSelect #: PS11739347
Manufacturer #: WP22002263
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$16.32
In Stock
Idler Pulley Assembly
PartSelect #: PS11771601
Manufacturer #: DC93-00634A
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the ...
$62.67
In Stock
Thermistor
PartSelect #: PS11741828
Manufacturer #: WP35001191
This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$66.40
In Stock
Drum Support Roller with Axle
PartSelect #: PS11749648
Manufacturer #: WPW10177428
Sold individually.
$57.22
In Stock
Thermal Fuse with Bracket
PartSelect #: PS11741829
Manufacturer #: WP35001193
This part is the replacement thermal fuse for your dryer. When you order this part, you will receive the fuse itself, as well as the bracket that mounts it to the dryer. The thermal fuse is approximat...
$46.04
In Stock
Thermostat
PartSelect #: PS11741821
Manufacturer #: WP35001087
This thermostat helps to regulate the dryer's internal temperature.
$51.72
In Stock
Heating Element Assembly
PartSelect #: PS11750633
Manufacturer #: WPW10222771
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
$200.05
In Stock
Drive Belt
PartSelect #: PS11750299
Manufacturer #: WPW10205415
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
$75.45
In Stock
Clamp-Motor
PartSelect #: PS11743369
Manufacturer #: WP660658
This clamp is used to secure the drive motor.
$11.13
In Stock
High Limit Thermostat
PartSelect #: PS11741822
Manufacturer #: WP35001092
This high limit thermostat controls the level of heat in a dryer to prevent overheating. It does this by measuring the temperature inside of the dryer drum and turns off when it reaches 260 degrees Fa...
$59.56
In Stock
Idler Pulley Wheel
PartSelect #: PS11741820
Manufacturer #: WP35001086
Also called Roller.
No Longer Available
Questions And Answers for DV316BEW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DV316BEW
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer did not turn when power was on.
Callled the service company to diagnose the problem. Watched him take machine apart. He found the problem. Told me the parts that I needed. Didnt know what they were. Went to partselect.com looked my model up and found parts and ordered. Followed same steps as repair guy: Two screws in back of machine then slide top off. Six screws in
... Read more
front to remove front door ( 4 screws on top 2 on bottom) Changed the thermostat and thermistor. Saved 320 dollars :)
Read less
Parts Used:
-
JAMIE from VALLEY STREAM, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
53 of 65 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat in the dryer
Remove dryer covers and locate heater assembly. Removed heater assembly and checked visually if the heater coil is opened, I verified this with an ohm meter. Heater Continuity was OK. Next step I checked the heater sensors. Thermal fuse with bracket had no ohm meter reading between two terminals[open circuit]. Order part#35001193 "thermal
... Read more
fuse" with bracket from "partsSelect.com." Assemble back in reverse order. Please note that the dryer heater was filled with lint and needed a good cleaning.
Read less
Parts Used:
-
Walter from Lynden, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
53 of 81 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wet clothes in sensor dry mode(Samsung DV218)
top and the front had to be removed to get to the fan... the thermistor that sits in the exaust fan went bad... the heat would come on for a few minutes then turn off completely not getting to clothes dry.....
Parts Used:
-
Vincent from Lusby, MD
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
32 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!