Models > DRT900

DRT900 ((96093001804)(2013-03)) Husqvarna Cultivator - Overview

Sections of the DRT900

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Clevis Pin – Part Number: 532132673
Clevis Pin
★★★★★
★★★★★
(1)
PartSelect #: PS9009427
Manufacturer #: 532132673
$3.81
  In Stock
Tine, Spade – Part Number: 532163499
Tine, Spade
PartSelect #: PS9012308
Manufacturer #: 532163499
  No Longer Available
Nut Lock 5/16-18 – Part Number: 873800500
Nut Lock 5/16-18
PartSelect #: PS9160134
Manufacturer #: 873800500
Nut lock 5/16-18 (5/1 Lock nut) is a 5/1-18 inch silver metal nut. It can be installed using a wrench or socket to secure parts in pace, and to lock down to prevent backing out due to vibration. If da...   No Longer Available
Chain #35-50 Pitch – Part Number: 532102134
Chain #35-50 Pitch
PartSelect #: PS9008326
Manufacturer #: 532102134
$33.13
  In Stock
Bolt-Carriage (5/16-18x5/8) – Part Number: 872110505
Bolt-Carriage (5/16-18x5/8)
PartSelect #: PS9308328
Manufacturer #: 872110505
This OEM Bolt-Carriage (5/16-18x5/8) is used to secure parts in place on a range of equipment, and can be installed using a wrench or socket. Refer to your make model and diagrams to ensure this is th...   No Longer Available
Nut, Hex, Flangelock 5/16-18 – Part Number: 532155377
Nut, Hex, Flangelock 5/16-18
★★★★★
★★★★★
(1)
PartSelect #: PS9286345
Manufacturer #: 532155377
$6.36
  In Stock
Lock, Handle – Part Number: 532109229
Lock, Handle
PartSelect #: PS9007833
Manufacturer #: 532109229
$7.64
  In Stock
Belt, V – Part Number: 532132801
Belt, V
★★★★★
★★★★★
(1)
PartSelect #: PS9009361
Manufacturer #: 532132801
  No Longer Available
Bearing, Shaft, Ground Drive R.H. – Part Number: 532143008
Bearing, Shaft, Ground Drive R.H.
PartSelect #: PS9016290
Manufacturer #: 532143008
$7.64
  Special Order
Bearing, Shaft, Ground Drive L.H. – Part Number: 532431219
Bearing, Shaft, Ground Drive L.H.
PartSelect #: PS9019290
Manufacturer #: 532431219
$11.46
  Special Order

Questions And Answers for DRT900

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken drive axle chain
removed engine, sheet metal, handle bars, and tines. Seperated transmission case and replaced broken chain. This is not difficult it's just time consuming. A tiller repair shop would charge about $400 to do this job. It cost me $40 for a chain and gasket, Both fit perfectly, great service. Thanks
Parts Used:
Gasket, Gearcase Chain #35-50 Pitch
  • richard from MECHANICSVLLE, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced old belt
took cover off and replace belt
Parts Used:
Belt, V
  • David from WINSTON SALEM, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench set
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!