Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DLG9588WM > Parts

DLG9588WM LG Dryer - Parts

All parts for the LG Dryer DLG9588WM

Below is a list of all parts for the LG Dryer DLG9588WM - Residential DRYER. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the DLG9588WM
1-14 of 81
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$32.77

Drum Support Roller

This part is sold individually. The drum support roller is found in your dryer. It is used to hold the drum in place in the cabinet while letting the drum rotate on the support rol...

$30.05

Lint Filter

The lint filter in your dryer is used to collect lint as it passes through the dryer vent. If you notice that your dryer is not providing enough heat, or if it takes too long to dry, you may need to replace the lint filter. You should also replace the lint filter if you notice it is damaged during regular maintenance. Many of our customers have rated this repair as easy. To complete the repair, simply remove the old lint filter and replace it with the new one. You may want to use a flat head screwdriver to remove any residual lint before you install the new filter.

$5.72

Sensor

The sensor controls the temperature in your dryer and will turn off once your clothes have reached the desired dryness level. If you notice that your dryer is not giving off enough...

$15.54

THERMOSTAT

The thermostat is a part for your dryer, and it is roughly 1 inch long by roughly 1.5 inches wide. The purpose of the thermostat is to measure the temperature of the air inside your dryer drum. As the air is being measured, it will turn the heat on or off in order to maintain a stable temperature within the drum. The most common reason you would need to replace your thermostat is if your dryer is not receiving enough heat, or any heat at all.The tools you will need to complete this repair include a Phillips screwdriver, and a flat-head screwdriver.

$17.98

Thermistor,NTC

This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce e...

$26.70

BELT,POLY V

This dryer belt helps rotate from the drive motor to the drum. It is located between the motor and the tub. If you notice that your dryer is noisy or is not tumbling this could be due to your belt needing to be replaced. This belt is long, black, and slim (1/4-inch wide). The belt wraps the length of the dryer drum, secured by a tension pulley and then loops around the motor pulley. If you find that the drum is not turning properly or at all while your dryer is in succession, it might be due to the belt being broken.

$21.53

Cover,Guide

Located just inside the dryer door. The guide cover (or grill cover) is where the hot air circulates through the appliance. This part may crack or become damaged over time, causing...

$14.73

ROLLER ONLY

$59.13

Gas Igniter

Comes with bracket and wire harness.

$15.54

Thermostat

$4.35

Leg

$11.85

Guide,Filter

The filter guide is found in your dryer and is what houses and supports the lint screen located in the exhaust air duct. This part is located at the bottom part of the dryer opening. The housing is approximately 14 inches long and 5 inches wide, with a moon shape on the top where the lint trap goes. The filter guide may break of wear down over time and with repeated use, and may need to be replaced. This OEM part comes right from the manufacturer and is sold individually.

$25.44

Conversion Kit - NG - LP

$15.54

Thermostat Assembly

All Parts for the DLG9588WM
1-14 of 81