Models > DG407

DG407 Maytag Dryer - Overview

Sections of the DG407

[Viewing 11 of 11]
Keep searches simple, eg. "belt" or "pump".
Drum Roller Shaft Washer – Part Number: WP312535
Drum Roller Shaft Washer
★★★★★
★★★★★
(1)
PartSelect #: PS11740748
Manufacturer #: WP312535
If you notice that your dryer is noisy or will not tumble, then you may need to replace the drum roller shaft washer. This drum roller shaft washer is just under an inch in diameter and is sold indivi...
$13.79
  In Stock
Screw – Part Number: WP400021-1
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742240
Manufacturer #: WP400021-1
Sold individually.
$13.25
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
  In Stock
Rubber Foot Pad – Part Number: WP210684
Rubber Foot Pad
★★★★★
★★★★★
(1)
PartSelect #: PS11738859
Manufacturer #: WP210684
The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is ju...
$15.28
  In Stock
Cycling Thermostat - Limit 135/155 – Part Number: WP694674
Cycling Thermostat - Limit 135/155
★★★★★
★★★★★
(8)
PartSelect #: PS11743793
Manufacturer #: WP694674
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 de...
$57.32
  In Stock
Adjustable Leveling Leg – Part Number: 22003428
Adjustable Leveling Leg
★★★★★
★★★★★
(1)
PartSelect #: PS2021026
Manufacturer #: 22003428
If your washer shakes or vibrates loudly when it reaches its max speed, make sure the 4 levelling legs are even. Adjust the legs so that the machine is level, and tighten the locking nuts on the legs ...
$18.47
  In Stock
Screw – Part Number: WP489483
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11742755
Manufacturer #: WP489483
This screw is sold individually.
$13.09
  In Stock
Lower Dishrack Kit – Part Number: W10311986
Lower Dishrack Kit
★★★★★
★★★★★
(13)
PartSelect #: PS2378335
Manufacturer #: W10311986
This kit comes with the wheels, bumpers, fold down tine and flexrow retainer.
$277.64
  In Stock
Screw – Part Number: WPY014874
Screw
PartSelect #: PS11757438
Manufacturer #: WPY014874
Sold Individually.
$8.04
  In Stock
Cycling Thermostat (Limit: 140-20) – Part Number: WPY304475
Cycling Thermostat (Limit: 140-20)
★★★★★
★★★★★
(3)
PartSelect #: PS11757518
Manufacturer #: WPY304475
Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 140 degrees Fahrenheit and a differenti...
$61.54
  In Stock
Screw – Part Number: WP1163839
Screw
PartSelect #: PS11738342
Manufacturer #: WP1163839
10 - 16 x .375
$5.36
  Special Order
Lint Filter – Part Number: 300838
Lint Filter
PartSelect #: PS2028956
Manufacturer #: 300838
This filter collects lint as it passes through the dryer vent.
  No Longer Available

Questions And Answers for DG407

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the DG407

[Viewing 2 of 2]
Noisy
Fixed by
these parts
Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stripped leveler screw making impossible to level my washer
Put blocks under the washer where the leveling leg was needed and screwed the part into the washer. Then it was just a matter of moving the washer into place and leveling. Pretty easy.
Parts Used:
Adjustable Leveling Leg Rubber Foot Pad
  • Rebecca from Wylie, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
21 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Temperature setting not working
Took off back cover, thermostat was easily identified because of photos I've seen on website. Took 2 connectors off, removed 2 screws and removed old thermostat. That was pretty much it!

NOTE: Replacement thermostat 694674 has an adjustable temperature range setting that MUST be manually set prior to installing! You need to use the enclosed chart to find your original part# and make sure the setting is matched. My original part# 341146 had a "D" setting so I had to change but very easy to do.
Parts Used:
Cycling Thermostat - Limit 135/155
  • Robert from Buffalo, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom rack was starting to rust away and we needed a new one
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect
Parts Used:
Lower Dishrack Kit
  • pat from muncy, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!