DE500PXW1 Westinghouse Dryer Parts & Repair Help | PartSelect
Models > DE500PXW1

DE500PXW1 Westinghouse Dryer - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(18)
PartSelect #:PS418807
Manufacturer #:131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear b...
$4.33
In Stock
(3)
PartSelect #:PS459830
Manufacturer #:5303281154
This is a flat style ridgeless dryer belt.
$19.36
In Stock
(3)
PartSelect #:PS457526
Manufacturer #:5303212849
Use this idler pulley assembly with gas or electric clothes dryer that has a flat dryer belt. ***Please NOTE: This part has been redesigned by the manufacturer and may not fit you...
No Longer Available
(10)
PartSelect #:PS471605
Manufacturer #:5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryer...
$6.72
In Stock
PartSelect #:PS459789
Manufacturer #:5303281085
With the spring it helps keep the tension in the belt by pulling the idler pulley.
$9.89
In Stock
PartSelect #:PS470308
Manufacturer #:5303937128
This dryer lint screen and frame is used for Frigidaire/WCI brand electric and gas dryers. The filter is 14-1/4 inches wide and comes with a bezel frame and mounting screws.
No Longer Available
PartSelect #:PS450274
Manufacturer #:5300142887
$136.80
Special Order
PartSelect #:PS450275
Manufacturer #:5300142888
No Longer Available
PartSelect #:PS450991
Manufacturer #:5300603182
No Longer Available
PartSelect #:PS450273
Manufacturer #:5300142885
No Longer Available
Questions and Answers for DE500PXW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 86 of 129 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more

Broken Dryer Belt

Flat Style Belt – Part Number: 5303281154
  • Customer: Tod from West Springfield, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 21 of 27 people found this instruction helpful
1st I pried the dryer top open then disconnected the two wires for the auto shut-off. Removed four nuts with driver that opens front and releases dryer barrel. Lifted front up a bit to remove from two lower tabs at bottom of unit and put aside.

I then slid the belt over the barrel noting the side up directions on the belt. On the lower left on th... read more

Belt Broke

  • Customer: Patricia from Clifton Park, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 9 of 12 people found this instruction helpful
Very easy install. Removed the top and front of dryer, and put new belt on drum. Also replaced Idler Pulley (altho didn't really need to.)
I've had the dryer more than 20 years, so I am really glad such a simple repair will keep it going!
Parts arrived very quickly - great service from PastSelect! read more