Models > DE26D6H > Instructions

DE26D6H Admiral Dryer - Instructions

All Instructions for the DE26D6H
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cracked terminal block
Killed the power, used socket set, installed new one.
Needed wire cutters and stripper, to put new terminal ring. Reconnected everything. Took about 20 minutes.
Parts Used:
Terminal Block
  • Anthony from New Fairfield, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terminal block and power cord melted.
Removed power cord and terminal block and replaced with new ones. Still could'nt find why dryer would not run. Founed I had not hooked up one of the power wires as it had turned up so it couldnt be seen. Hooked it up and dryer runs like new. Thanks for the quick shipment.
Parts Used:
Terminal Block
  • Michael from Orient, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminel block melted
replaced the terminal block
Parts Used:
Terminal Block
  • Lonnie from Soda Springs, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DE26D6H
1 - 3 of 3
Back to Top