Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DDC4500SFM

DDC4500SFM General Electric Dryer - Overview

Get Parts and Repair Help for DDC4500SFM

If you know the dryer repair part you need, you can browse the list of all parts on the DDC4500SFM, or you can search by name or part description. You can also find your part by where it is located on the DDC4500SFM by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DDC4500SFM parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.90

Drum Bearing Slide - White

This is a drum bearing slide, also known as bearing drum slide, glide, or pad, that is fitted to a dryer. The slide functions by supporting the front drum as the drum rotates. This...

Order within the next 12 hrs and your part ships today!
$4.23

Drum Bearing Slide - Green

The drum slides give support to the front of the dryer drum. As they start to break down it may cause your dryer to make noise or not dry clothes in an appropriate amount of time. This item is sold individually. You will need to purchase two as there are two located in your dryer. They attach to the outer-most sides of the bearing. The manufacturer recommends replacing both slides at the same time. Use this as an opportunity to clean out the lint and dust in the dryer to keep your machine running smoothly. This is a genuine replacement part that comes directly from the manufacturer.

Order within the next 12 hrs and your part ships today!
$53.22

Rear Drum Bearing Kit

This rear drum bearing kit includes a shaft, ground strap, bearing, seven screws, and installation instructions. The bearing plate comes with a slot in it for the ground strap. Thi...

Order within the next 12 hrs and your part ships today!
$11.10

Door Handle - White

This part is on the outer door of the dryer.

Order within the next 12 hrs and your part ships today!
$10.58

Drive Belt

This belt has a length of 87 inches, width of 1/4”, flat, with 4 ridges.

Order within the next 12 hrs and your part ships today!
$18.68

Idler Pulley Wheel

A dryer's idler pulley wheel serves to help the belt to rotate the drum.

Order within the next 12 hrs and your part ships today!
$3.71

LATCH DOOR

This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door...

Order within the next 12 hrs and your part ships today!
$12.05

Interlock Switch

The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.

Order within the next 12 hrs and your part ships today!
$4.02

Door Strike

Order within the next 12 hrs and your part ships today!
$16.60

Door Switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Order within the next 12 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dryer belt broke

  • Customer: Matt from La Belle, MO
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 137 of 158 people found this instruction helpful
first I took the dryer apart 1st thing i did was unplug the power supply (safety first) then I removed the top of the unit then removed the front cleaned all the lint from the inside of the cabinet I found the proper belt size on part select.com the next day I had my dryer belt delivered (which cost 1/3 the price of the local repair shop price)
then I ... read more

The dryer drum turned ok, but the gas heat did not start.

  • Customer: Gary L. from Freeport, IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 95 of 128 people found this instruction helpful
First I found and watched three videos on how to open the dryer and replace the igniter.
Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown.
I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the ... read more

The dryer door handle broke off.

  • Customer: Jim from North Richland Hills, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 70 of 88 people found this instruction helpful
I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly. read more