Quick Question!

Have you ever purchased from PartSelect.com before?

Models > DAQE7077KW0

DAQE7077KW0 Frigidaire Dryer - Overview

Get Parts and Repair Help for DAQE7077KW0

If you know the dryer repair part you need, you can browse the list of all parts on the DAQE7077KW0, or you can search by name or part description. You can also find your part by where it is located on the DAQE7077KW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for DAQE7077KW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for DAQE7077KW0

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.32

Door Catch

The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, w...

Order within the next 12 mins and your part ships today!
$55.95

High Limit Thermostat

This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and only comes back when it drops by at least 70 degrees Fahrenheit. If your dryer is overheating, taking too long to dry clothes, or is not producing enough heat, replacing the thermostat could be the solution to your problem. The tools needed for this part are a Phillips screwdriver, putty knife, and needle nose pliers. Refer to the manual provided by the manufacturer for installation instructions and guidance.

Order within the next 12 mins and your part ships today!
$80.42

Blower Housing with Blower Wheel

***Please Note: This part is a substituted part by the manufacturer. It may appear different, but should still work with your appliance.

Order within the next 12 mins and your part ships today!
$28.58

Control Thermistor

This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating. This part is located in the blower housing.

Order within the next 12 mins and your part ships today!
$8.72

Door Strike

The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. Thi...

Order within the next 12 mins and your part ships today!
$6.65

SCREW

Order within the next 12 mins and your part ships today!
$31.04

High Temperature Adhesive

This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temper...

Order within the next 12 mins and your part ships today!
$25.17

FILTER

Order within the next 12 mins and your part ships today!
$6.86

SCREW

Sold individually.

Order within the next 12 mins and your part ships today!
$7.46

GASKET

This is a gasket, but you may also know it as a door seal, for your dryer. This part prevents heat loss during a drying cycle by keeping the area around the door sealed. This gasket is all black, and is made of extremely flexible material. The surface of this part is roughly half an inch wide, and a quarter inch thick. One side of the material is smooth, while the other side has clips to make your installation easier.

Order within the next 12 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door Latch & Door Strike Broken On Dryer

  • Customer: Bruce from Seminole, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 29 of 41 people found this instruction helpful
I removed the broken door latch & strike with pliers. Then I pushed the new parts into place read more

My husband ruined the old latch by trying to shut the door too hard, and the old latch fell down into the inside of the dryer.

  • Customer: Michelle from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 22 people found this instruction helpful
I took the new latch out of the package and snapped it into place. It took about 15 seconds, and that included the walk to the laundry room! read more

Blower wheel was raddling

  • Customer: jena from loganville, GA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 20 of 45 people found this instruction helpful
The blower wheel was a bit difficult, but manigable to do yourself. read more