All Installation Instructions for Crosley Range CWEF310GSD

Drawer Glide Was Broken

Took the drawer out, snapped the new glide in place, and replaced the drawer. Installation was simple with no tools required.

Parts Used:

Front Drawer Glide

Karen from Yuma, AZ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven would not heat

Pulled stove away from wall and unplug .Removed grates for better access. Unscewed element scews removed element & tested for continuity.there was none element is bad . Replaced with new one . Time about 20 minutes.

Parts Used:

Oven Bake Element

Kevin from Swanville, ME
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burnt out baking element

Removed the back panel, disconnected the terminals and removed the old one and installed the new one.

Parts Used:

Oven Bake Element

Joseph from HAMPTON, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bottom burner wouldn’t heat

Watched the video

Parts Used:

Oven Bake Element

cynthia from SEBRING, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bake elemen t shorted out.

Turned off power to stove;removed baking racks , loosened Holden screws to pushon bake element removed old bake element,installed new pushon bake element.

Parts Used:

Oven Bake Element

LARRY from LEES SUMMIT, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The elements were not heating up

It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!

Parts Used:

Main Terminal Block Kit

Tanya from KALISPELL, MT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I forgot to remove something I had saved in the oven, planning to remove it before using the range.

Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience with those in need of you services. Thanks. Marilyn Kasson

Parts Used:

Oven Rack

Marilyn from Clearwater, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

N/A

I had open back cover and remove the switch than replace new switch. Makesure cable conection.

Parts Used:

Infinite Burner Switch

Dineshbhai from Rincon HWY21, GA
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bake Element caught on fire

First we turned off the electic, then we took the back off the stove and pulled the wire off the bad element then replace the new element. It was very easy to do.

Parts Used:

Oven Bake Element

Judy from Spencerville, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The inside glass on my oven was broken and falling out.

First I removed the oven door from the range by removing 2 screws from the door. Next I removed 2 more screws from the oven door to get to the panel beneath. Once the top portion of the door was removed there were 4 nuts holding the glass sections together. Once these nuts were out I removed the broken class, replaced it with the new glass and reassembled. It was a very easy and quick project. I was so happy to find the part. I thought I was going to have to buy a new range. Thanks.

Parts Used:

Inner Oven Door Glass Panel

Taviatha from Dallas, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bake element bad, broiler element OK.

Unplugged the stove first !
Removed bake element ; (2 screws), looked OK,
measured with an Ohm meter, measured "open".
Also, removed rear cover (6-screws), wires not burnt. Ordered new element-rec'd next day! My wife installed it and replaced rear cover. Works great (oven!) and about $10 cheaper and quicker than from a local dealer!

Parts Used:

Oven Bake Element

Gerry W. from Oxford, IA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

5 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Inside Oven Door Glass Panel Broke

Got a copy of the parts breakdown for the oven door from partselect. Com. Removed 8 screws from outer frame (3 top, 3 bottom, 1 on eah side). Removed the main glass pane from oven door, be careful when doing this as this is most of the weight of the door. It will want close on its own due to lack of weight. Removed the 2 top screws that attach the handle. Removed some screws from some plates that retain the 2 panes of glass of glass. Removed the third (most inner, broken) pane of glass. Replaced with new one. Reversed disassebly procedure for assembly.

Parts Used:

Inner Oven Door Glass Panel