Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CWEF310GSC > Instructions

CWEF310GSC Crosley Range - Instructions

All installation instructions for CWEF310GSC parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CWEF310GSC
601-615 of 916
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

front left burner was on HI no matter what the dail setting was

  • Customer: Eric from Mosier, OR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
pull back panel, 2 screws & one wire at a time.....And don't forget to KILL POWER!!!!super easy works great now and the wife loves it.

my bake element was sparking it was cracked

  • Customer: JAMIE from SAVANNAH, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
used fill up screw driver removed bake element, detaching it from power wires on both ends replaced it with new bake element screwed back in and was done in 5 minutes.

The Bake Element burned out and broke

  • Customer: Deneice from Guilford, MO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First I unplugged the stove. I used a nut driver to remove the element from the back of the oven. The ends of the element were attached to wires. I pulled the ends of the element out of the wire ends, being careful to hold on to the wires to protect them from breaking. I pushed the wire ends onto the new element, fed the wires back into the back of the oven, put the screws back in and it was done! The repair was very simple. The hard part was cleaning under the stove and the sides of the stove!! :) When I pulled it out to unplug it I found that my children love to sweep things underneath it!! Oh well now I have a working oven AND a clean stove!

element burned out

  • Customer: james from oscoda, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
watched the video online that was provided. made the job very easy. anyone could do it. works great. thanks.

old oven racks were nasty!

  • Customer: Richard from Fort Wayne, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.

element burnt out

  • Customer: Edward from Inverness, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
two screws and plugged back in works great

drawer glides broken

  • Customer: robert from toms river, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
poped out the old ones and new ones slide right in.

Bottom Element burned out

  • Customer: Jon from Clay Center, KS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
First, I UNPLUGGED the range. After removing the screws that hold the element in I pulled it out, disconnected one side, then tried to disconnect the other side only to find it soldered on. With the diagonal pliers I cut wire next to where the terminal was connected to the element. Using the crimping tool I stripped the end to expose about 1/4 inch of clean wire, twisted it tight, put on a new terminal, crimped it in place and pushed it on the element. After that, all I had to do was push the element back in place and secure it with the screws. The last step was to reconnect the power and turn the oven on low heat for about five minutes to burn off any residue on the element. Works great! Thank you

The Element burned out

  • Customer: Yvonne from Spring City, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I turned the breaker off first of course. Then I removed the oven racks and removed the metal tabs by unscrewing the hex nut with the nut driver. I pulled the wires in to the oven and unsnapped them from the element. I bet them so that they would not go back through the hole. I removed the broken element and snapped in the new element. I pushed the wires back through the holes and lined up the metal tabs. I put the hex nuts back in and screwed them in tight. Turned the breaker back on. Set the oven to 350 and turned it on. I could feel the heat at once. Ta-DA!

Oven would not heat

  • Customer: Ken from Carson City, NV
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Diagnose if element or controller by removing element and turning oven on. Found voltage at wires, so assumed controller OK. Check resistance/continuity of element. Appeared open (don;t what actual value should be (neglected to check new part). So pretty sure it was element. Left disassembled while ordering new part (use of range top ok - no oven use) replaced element, function check OK. Done.

Storage drawer was hanging down.

  • Customer: Michael from Midlothian, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Followed the instructional video , removed the drawer, popped out the damaged part, inserted the new part, replaced the drawer. Didn't need any tools and the job took less than 10 minutes to do.

no problem

  • Customer: Janis from Groton, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The repair was easy. My comment however is about the young lady that helped me with the return. I order the wrong part and when it came in, it didn't fit. I called for help returing the part and she was kind enough to help me order the right part, which I didn't think she would do. I made it so I will definately use this company again and reccomend you to my family and friends.Thank you, Janis Krotsis

element would not heat.

  • Customer: Arnold from Carlsbad, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced the control I got from you , even though it was a little different the lugs matched up and works great.

My bake element burned out

  • Customer: Michael from Klamath Falls, OR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
My bake element stopped working and found part of it burned. So I ordered a new one and received it in a week. It took about 2 min. to remove the old and install the new one and I'm back baking.

baking element broke

  • Customer: TRAVIS from BLOOMINGTON, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
unplugged stove;used nut driver to unscrew 2 screws and remove broken element;plugged in new element;used nut driver to replace screws. done. i used a flashlight to see better in oven. easy
All Instructions for the CWEF310GSC
601-615 of 916