CVGX2423B Jenn-Air Cooktop - Instructions

I merely lifted the downdraft cover and inserted the new screen as
directed. THANK YOU FOR YOUR PROMPT RESPONSE TO MY ORDER.

Remove the knobs then remove the four screws holding the trim remove the two sheet metal screws then lift the unit up and out of the cook top remove the nut from the old fan switch remove the two wires from the switch install the new switch put the wires back on the new switch then place the assembly back in the stove top insert and fasten the two sheet metal screws install the trim and knobs and your done. Note : check the nut before hand to see if it is the same as the old one there was no new nut with the new switch so I had to buy one.

Just needed to replace a scratched up grill on my stove top. The black paint was scratched off and looked horrible. You site made it very easy to find what I needed and it got here in two days. If I had known it was going to be that quick and easy, I would've done it a long time ago! Thanks!

Just placed new filter in slot

removed motor, saw that stablizers were broke and went to a local parts supply shop called SUNDBERG and was given a price of about 49.00 for three stablizers. at that point i went to the internet and found PARTSELECT.COM were i found the same parts for a fraction of the price,17.00, i could not believe it! SUNDBERG customer service was horrible.PARTSELECT custormer service is great and was just over the internet,any how the repair is done no more loud noise and wife is happy again ,for awhile.thanks keep up the good work.i tell everybody about you guys.

First I removed 3 screws that held a plate againt the wires. Then pulled the element out about 3 inches and disconnected the 2 wires holding the old element and connected them to the new element. Replaced the plate with 3 screws and I was done.

Removed the part that didn't work and replaced it with the new one

Used 5/16 nut driver with 2 sided tape in the inside. Removed old orifice from tape and stuck new one to tape and installed it. Did the same for rest of them.

I actually didn't do the repair. I called a service tech, but found it cheaper and faster to order the part myself. It arrived in 2 days. The tech removed the top part of the cook top with a philips screwdriver after that it was easy as unscrewing the valve and replacing it with the new one and tightening it with a wrench. He put the top back on, tightened the screws and that was it.

took the nuts off &replaced the new ignited

Took the old one out, plopped the new one in.

Needed to remove all 4 burners to repair
one, but it went without a hitch.

Thanks to your exacting and clear diagrams, we were able to locate the correct parts
We called JennAire, but they were unable to
find the part..

It was delivered in a timely fashion and
we were able to finish the job in about
3 hours. thanks

very easy slip in

Ordered necessary parts from PartSelect and upon arrival removed old parts and installed new parts. Functionality was not changed, but the appearance improvement was fantastic. Now I can be proud of my kitchen appliances and how they appear to guests in my home. The best aspect of my experience was the ease of accessing and using the PartSelect web-site and the exploded schematic(s) that made part identification and order placement a breeze.

Regards, T.j. Brandt Corona, CA

remove two screws then unplug the wires put the wires back on the new one