CSC22GASAWH Hotpoint Refrigerator - Instructions

when I got on your site I was able to find the part easily & your installation video was a big help. It fit perfectly & was very easy to install--it's working great!!!!!thank you so much

I watched the you tube video. Very easy! the part was easy to order came earlier that expected and was fixed in less than 5 minutes!

Unscrew 2 screws to remove broken part, screw in new.

First, depending on when you find out your problem, be prepared to toss out spoiled food. Unplug the unit. Since you must allow the ice build up on the coil to melt, be prepared for water. Use towels placed under the coil in the freezer to soak this up or it will end up on the floor. Remove ice maker bucket as the ice will melt, that is if there is any. In my case the defrost timer was bad but I later learned that my defrost heater was also bad. Do yourself a favor and change both the defrost timer and defrost heaters. This issue is generally an age issue so replacing both will give you peace of mind. Also, clean the whole freezer as this is the time to do it. You will be surprised at the ice maker bucket cleanliness. Time to prepare and clean is what takes additional time. Time to repair is short and simple. One last thing, when replacing the defrost timer try not to mess with the temp. control slides as you will have to put them back in the proper positions for reassembly of the cover.

First off, Parts Select has a great YouTube video showing exactly how to replace this refrigerator hinge cam. This repair was for my sister's 20-year old GE refrigerator. I used to do this same repair every 3 years on an expensive fridge my wife and I owned - one that had additional wood panels mounted on the door. The panels exceeded the hinges' designed weight limit, so every 3 years I replaced the bottom plastic hinge cams. On that fridge, I could replace BOTH interlocking hinge cams - one pair on each door. On my sister's fridge, the bottom cam of the pair appeared to be riveted onto the frame - rendering it impossible to replace. You may be able to replace both interlocking cams or only the top half cam. You won't know until you lift the door off and look. The bottom cam sits at a 90 degree angle to the door cam and it remains attached to the bottom frame of the refrigerator. These are easy to replace and their design is ingenious. The job is simple and well worth tackling if only to see how your door works. My sister's bottom cam was worn out, but not broken. The blessing: replacing the top half of that cam - the part attached to the bottom of the door - allowed the door to open and close LIKE NEW! The door worked perfectly and I'm thankful to Parts Select for having the hard-to-find cam and for shipping it overnight to me while visiting my sister in Ohio. Now her 20 year old refrigerator door closes on its own, tight as a drum, as if it was brand new. To be safe, I ordered (2) pieces - the matching top and bottom of the pair - but due to the rivet, could only replace one cam. The original $3 "fiber" shim was still good, but I replaced it anyway. I recommend taking cell phone photographs as you go so you know exactly how to re-assemble the three or four interlocking parts of the hinge. I referred to my photos as I re-assembled the new cam. Clearing items off the fridge door: 10 minutes. Removing the shelves, unscrewing the top and lifting the door to the counter: 10 Minutes. Disassembling the hinge, cleaning the area and reassembling the cam/hinge: 20 Minutes. Cleaning the bottom cam area of the Fridge mount and re-mounting the door: 10 Minutes.

Ordered part on line, arrived the next day. Looked at the screw (phillips head). Had trouble dropping screws but got our magnetic phillips head and it worked like a charm. So proud of myself as my husband did not have to do a thing.

I just followed the video instruction supplied by PartSelect and the whole thing was a breeze.

Removed freezer door, put a blanket over the opening to keep food frozen. Installed hinge and replaced door.

Followed the u tube video that was on the Part select website. Very easy install when following the video.

Fairly easy I pull the fridge foward and remove the backing board and notice the fan wasn't working, so I remove the fan and bench tested and it was burned then I clean the condenser with compress air if you don't have air then a vacuum cleaner works then once the part arrived I install it the now if working very good

Best for 2 people on this repair as 1 person needs to hold the door and the other position the bottom pin in place on reassembly. On my side by side I was replacing the cam on the cold food side, not the freezer. But I got down and inspected both the broken cam and the cam on the side that wasn't broken to understand how the parts fit together. Each door has 2 cams that work/fit together. So be sure the one you are replacing is installed properly (flat side towards the door body). Remove all contents from inside door including the shelves. Use a phillips screwdriver to remove the cover plate on the top hinge. Use tape or a marker to mark on the refrigerator top a corner of where the bracket is positioned, for proper placement on reassembly. While someone is holding the door, remove the 2 bolts from the top bracket (or the back one is just loosened so bracket can be moved out of the way). Lift door off the bottom pin. Turn the door on its side to expose the bottom bracket. There should be 2 bolts here. The furthest one from the pin only needs to be loosened. The other bolt will need to be removed but as you do this be sure to not let the other 2 metal pieces fall out. Remove the broken cam and replace with the new part. Realign the parts and bracket over the pin rod hole and tighten both bolts. Replace the door onto the bottom pin. Then add top bracket and align it to the marking and screw back in these 2 bolts. Test door for any needed adjustments (I had none). Then replace the top bracket cover with its screw. Voila! Clean the shelves and put them in the door and fill them up. :-)

replaced with new ones

Removed the back panel in freezer, all coils were frozen solid. Turned power off to thaw out. Used info on Parts Select website to determine what was needed to repair. Parts came very quick and it is now working just fine.

Did the repair jut like the instructions on the web site stated. There was a good video for doing this repair. Looked at it a couple of times and did the repair right off the bat. Thanks folks.