Models > CS-330MX4

CS-330MX4 (C07411001001 - C07411999999) Echo Chainsaw - Overview

Sections of the CS-330MX4

[Viewing 14 of 14]
Keep searches simple, eg. "belt" or "pump".
Spark Plug Bpm-8Y – Part Number: 15901019830
Spark Plug Bpm-8Y
★★★★★
★★★★★
(1)
PartSelect #: PS9263506
Manufacturer #: 15901019830
This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to in...
$3.99
  In Stock
Fuel Filter – Part Number: A369000480
Fuel Filter
★★★★★
★★★★★
(2)
PartSelect #: PS11826311
Manufacturer #: A369000480
This OEM Fuel Filter is a silver and white, steel/felt, part measuring about 1.25 inches in length and 3/4 inch wide. It can be installed with pliers and is rated as Easy to install by customers. Th...
$5.36
  In Stock
Fuel Tank Vent – Part Number: A356000031
Fuel Tank Vent
★★★★★
★★★★★
(1)
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$7.63
  In Stock
Stud – Part Number: V224000031
Stud
★★★★★
★★★★★
(1)
PartSelect #: PS9237151
Manufacturer #: V224000031
This part is the replacement stud for your chainsaw. It is approximately 1 ¼ inches long and is black in color. The stud secures the chain bar to the chainsaw. It the stud is damaged or missing, it ca...
$4.99
  In Stock
Clip – Part Number: 13201309820
Clip
PartSelect #: PS9261895
Manufacturer #: 13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers. This part attaches to the fuel filter to secure the fu...
$5.19
  In Stock
Flange Nut 6 – Part Number: 43301903933
Flange Nut 6
PartSelect #: PS9279274
Manufacturer #: 43301903933
$4.99
  In Stock
Gear, Bevel – Part Number: V651000011
Gear, Bevel
★★★★★
★★★★★
(2)
PartSelect #: PS9237267
Manufacturer #: V651000011
$7.72
  In Stock
Gear, Bevel – Part Number: V651000001
Gear, Bevel
PartSelect #: PS9246388
Manufacturer #: V651000001
$7.72
  In Stock
Tensioner, Chain – Part Number: C309000030
Tensioner, Chain
PartSelect #: PS9191505
Manufacturer #: C309000030
$4.99
  In Stock
Clip – Part Number: V490001230
Clip
PartSelect #: PS10053748
Manufacturer #: V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of meta...
$4.99
  In Stock
Screw 5x20 – Part Number: 90025305020
Screw 5x20
PartSelect #: PS9153156
Manufacturer #: 90025305020
$4.99
  In Stock
Nut 5 – Part Number: 90050000005
Nut 5
PartSelect #: PS9148697
Manufacturer #: 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to se...
$4.99
  In Stock

Questions And Answers for CS-330MX4

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
worn out paddles and scrapper blade
I followed the instructions on Youtube, but I used an Impact drill and ratchet set. The hardest part is assembling the screw on the lower part of the paddle. It helps if you have your snow blower against a wall or something else so that it can not move b/c you will need some strength to push the screw threw the pre-drilled hole to the 10mm nut. I used a vise grip to hold the nut do to the lack of space and with my impact driver started to thread the screw to the nut. This part took about 1 min on one side and 10 minutes on the other side. I guess I got lucky the first time. Changing the scraper blade took about 4 minutes start to finish. It will help if you have needle nose pliers to remove and reattach the spring on each side. The instruction on you tube were very helpful. Hope you find this information helpful.
Parts Used:
Gear, Bevel Collar, 8 Bolt, 5 Gear, Bevel Tensioner, Chain Screw 5.7 4X12
  • Sam from GAITHERSBURG, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!