CGLMV169DBC Frigidaire Microwave - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken handle
Very easy repair. I popped of the inside plastic door cover with a putty knife, removed screws to old handle, inserted new handle and reinserted screws and plastic cover. It was that simple. The complete job took me under 3 minutes.
Parts Used:
-
Dan from Bella Vista, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door broken
The new door is slightly different than the one I replaced. To install the new door, I had to remove the plastic "frame" on the new door with a small flat head screwdriver. Then, I could easily mount the door to the hinges on the microwave. Once on the microwave, I clicked the frame back into the door and it was good as new!
Parts Used:
-
Michael from Carlyle, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken door handle.
Piece of cake. Pryed the cover off of the back of the door with a flat head screwdriver and then screwed in the new handle.
Parts Used:
-
Matt from Uniontown, OH
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken Handle
Slipped the screw driver flat tip along the plastic strip near the latch inside of door to pry off the plastic cover to expose the screws holding on the door. Removed 2 screws and replaced handle less than 15 minutes.
Parts Used:
-
Lorenza from Philadelphia, PA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!