Models > CG206L > Instructions

CG206L Jenn-Air Cooktop - Instructions

All Instructions for the CG206L
1 - 15 of 100
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
one of the surface burner knobs melted and then cracked
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.
Parts Used:
Surface Burner Knob
  • Ronald from Philadelphia, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
474 of 479 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced filter
pulled old one out , cleaned the area & replaced with the new one.
Parts Used:
Grease Filter
  • ELOISE from MILFORD, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
482 of 504 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old grease filter that I actually did not know I had to change
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen
Parts Used:
Grease Filter
  • deborah from fort pierce, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
448 of 534 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old parts needed replacement
Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.
Parts Used:
Surface Burner Knob Grease Filter
  • Teresa from Clayton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
145 of 212 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
3 out 4 surface burner knobs were broken
Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!

Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.

Also, your site was easy to navigate and find what I was looking for. Many thanks!
Parts Used:
Surface Burner Knob
  • Aaron from Elkton, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
174 of 322 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My Jenn-Air is an "antique." The filter was disgusting!
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away the nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!
Parts Used:
Grease Filter
  • marion from aspen, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
166 of 319 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stem on the dial split, couldn't turn the burner on
threw out the old and slipped on the new dial....
Parts Used:
Surface Burner Knob
  • Kathy from Bell, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
150 of 289 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner knob brock
Went broke purchasing the very simple part through you PartSelect Appliance Parts
Parts Used:
Surface Burner Knob
  • Warren from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
148 of 287 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old knobs broken and couldn't turn on burner
Replacement parts fit as suggested by model number (newer parts are a little different but fit fine). Grates look a bit more modern but hopefully will work fine too.
Amazingly fast shipping!
Parts Used:
Surface Burner Knob Burner Grate - Black
  • Susan from Cherry Hill, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
148 of 291 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Falling apart 20 year old grease filter for downdraft counter rangetop
Cleaned out the downdraft cove, inserted the new filter, and put old filter in garbage can. Laughing. Thanks. Wish you had a FAQ's hotline. I'd like to know if the radiant inserts fit the older coil-type models.
Parts Used:
Grease Filter
  • Roe from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
147 of 289 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken spindel on knob
took old off, put new knob on, by hand
Parts Used:
Surface Burner Knob
  • Stephen from Bethesda, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
145 of 284 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke
pulled it off, went to internet to see if I could find.
Did Find. Ordered and replaced.
Parts Used:
Surface Burner Knob
  • Peggy from Ellwood City, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
68 of 132 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cooktop comes with two burners and a grill. I needed 4 burners.
Never really used the grill and needed 2 more burners so I just pulled out the grill assembly and plugged in the burner assembly, added the new pan cover and new grates and viola, I had a four burner stove. Still can pop the grill back in if needed. Much less expensive than buying a whole new cooktop.
Parts Used:
Burner Bracket - Black Double Burner Pan - Black Rear Burner Front Burner Burner Grate - Black
  • Clifton from Redlinds, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
36 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
converting to LP gas
Replaced old parts with new ones.
Parts Used:
Natural Gas to Liquid Propane Conversion Kit
  • Paul from Elk Grove, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
30 of 40 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fan switch broke
I unscrewed the housing unit, pulled out the 2 connectors and here is the hard part, getting the metal washers off the small posts. First I tried needle nose pliers, then I used a rubber mallet to bang it out from the top side far enough to use a reg. hammer to pull it off from the underside. Finally I got it off enough to break the washers with the needle nose pliers. Putting it back together was a breeze,took all of 5 minutes.
Parts Used:
Fan Switch Kit
  • Jill from Potomac, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
24 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CG206L
1 - 15 of 100