Models > CCGP2720P > Instructions

CCGP2720P Jenn-Air Cooktop - Instructions

All Instructions for the CCGP2720P
16 - 21 of 21
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
As soon as the parts arived it tooks only 1 1/2 hours to get everything fixed
took the nuts off &replaced the new ignited
Parts Used:
Spark Igniter
  • Robert from Pleasanton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Griddle was scratched.
Removed old griddle and plugged in new one.
Parts Used:
Griddle
  • Cathryne from Marietta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not light
remove two screws then unplug the wires put the wires back on the new one
Parts Used:
Spark Module
  • ned from leland, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken cooktop knob
Just slipped the new knob on with no problem. Very easy.
Parts Used:
Gas Valve Knob
  • Christine from Jefferson, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The Igniters Would Spark Continually And Then One Burner Would Not Go On
Turned off gas, unscrewed nut that held on the plate unplugged the igniter and replaced it and put it back together, very easy fix.
Parts Used:
Surface Burner Cap - Black - Large Spark Igniter
  • Diann from Wylie, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
bad screw on cap
replace burner cap
Parts Used:
Surface Burner Cap - Black - Large
  • Herbert from Awendaw, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CCGP2720P
16 - 21 of 21