Quick Question!

Have you ever purchased from PartSelect.com before?

Authentic Parts
Models > CCE1400B Maytag

CCE1400B Jenn-Air Cooktop - Overview

Get Parts and Repair Help for CCE1400B

If you know the cooktop repair part you need, you can browse the list of all parts on the CCE1400B, or you can search by name or part description. You can also find your part by where it is located on the CCE1400B by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for CCE1400B parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CCE1400B

[Viewing 1 of 1]
BURNER BOX ASSEMBLY
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.21
In Stock

Surface Burner Receptacle Kit

The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sur...

$2.96
In Stock

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

$4.88
Special Order

Screw

No Longer Available

SCREW

No Longer Available

BURNER BOX

No Longer Available

WIRE CABLE ASSY

No Longer Available

CONTROL HARNESS

No Longer Available

PARTITION

No Longer Available

LIMITER, 3/4

No Longer Available

BRACKET, RECEPTACLE

Common Symptoms of the CCE1400B

[Viewing 2 of 2]
Element will not heat

Fixed by these parts

Show All
Will Not Start

Fixed by these parts

Show All

Replacing the Surface Burner Receptacle Kit

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 155 of 167 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

Burner was out but the burner coil worked on onother burner

  • Customer: Richard from Orange, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 8 of 8 people found this instruction helpful
Replaced receptacle but it was not the problem. After further inspection I believe that the problem is the switch. The switch is on order now from Part Select. read more

The heating element socket had crumbled with age.

  • Customer: Edward from Webster, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 4 people found this instruction helpful
Changing the socket with a new one simply required removing one screw and splicing the two existing wires to the pigtails on the new socket. It took longer to unpack the replacement part than actually doing the job. read more

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.