Models > BL110

BL110 (41AD110G965) Bolens Trimmer - Overview

Sections of the BL110

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Carburetor – Part Number: 753-06190
Carburetor
★★★★★
★★★★★
(3)
PartSelect #: PS9119300
Manufacturer #: 753-06190
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes...
$30.42
  In Stock
Fuel Tank Assembly – Part Number: 753-06183
Fuel Tank Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS10009586
Manufacturer #: 753-06183
$11.68
  In Stock
Bump Head Knob Assembly – Part Number: 791-153066B
Bump Head Knob Assembly
★★★★★
★★★★★
(2)
PartSelect #: PS9306452
Manufacturer #: 791-153066B
This genuine bump head knob assembly, sometimes known simply as the bump head, is black and approximately 2 inches long. Sold individually, this plastic part releases the cutting line. Over time, this...
$12.20
  In Stock
Line Trimmer Spool – Part Number: 753-1155
Line Trimmer Spool
★★★★★
★★★★★
(1)
PartSelect #: PS9119496
Manufacturer #: 753-1155
This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.
$20.70
  In Stock
Air Cleaner Gasket – Part Number: 753-06253
Air Cleaner Gasket
PartSelect #: PS10009619
Manufacturer #: 753-06253
$2.99
  In Stock
Switch – Part Number: 791-182405
Switch
PartSelect #: PS10014381
Manufacturer #: 791-182405
This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your ...
$9.07
  In Stock
Throttle Trigger – Part Number: 753-04119
Throttle Trigger
PartSelect #: PS11839169
Manufacturer #: 753-04119
$6.42
  In Stock
Anti-Rotation Screw – Part Number: 791-182519
Anti-Rotation Screw
PartSelect #: PS10014468
Manufacturer #: 791-182519
$4.26
  In Stock
Spring – Part Number: 791-610317B
Spring
PartSelect #: PS10014644
Manufacturer #: 791-610317B
$9.25
  In Stock
Air Filter – Part Number: 753-06085
Air Filter
PartSelect #: PS10009557
Manufacturer #: 753-06085
$3.21
  In Stock
Carburetor O-Ring – Part Number: 753-06185
Carburetor O-Ring
PartSelect #: PS10009589
Manufacturer #: 753-06185
$2.99
  In Stock
Drive Shaft Housing Assembly – Part Number: 753-05748
Drive Shaft Housing Assembly
PartSelect #: PS9118363
Manufacturer #: 753-05748
$48.17
  In Stock

Questions And Answers for BL110

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the BL110

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Carburetor replacement
Removed 2 screws securing the air cleaner and carburetor to the engine using a T25 Torx driver. then removed the throttle cable from the carb.Then removed the o ring gasket from the engine and replaced with a new one and replaced the carb etc. Primed it and fired it up.Runs just like new.
Parts Used:
Carburetor O-Ring Carburetor
  • William from PALMETTO, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Parts Used:
Fuel Tank Assembly
  • Erik from ROBERTSDALE, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part didn't have cut outside for killswitch or spark plug wire
Had to cut plastic housing in order to get the part to fit.
If the new housing had the cut outside this would have been a simple 30 min repair.

Spend $5 more and get the right part from MTD/Bolens website.
Parts Used:
Starter Housing
  • Zachary from CANTON, NC
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!