BGHD2433KF0 Frigidaire Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Arm Broke
First I tried to pry the arm off the basket with a screwdriver. Then I googled it and there were the simple instructions, and I followed them, pull to take off, to put on push after aligning arm on basket til it snaps on.
Parts Used:
-
Hope from Garland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Water inlet valve leaking
first shut-off power and water! removed bottom cover panels and top two mount screws from DW. slide DW out about one foot for easier access. disconnect inlet valve wiring harness. then remove the screws that hold the unit to the dishwasher. then disconnect water outlet hose (mine was a black accordian type tubing) use your pliers to move back the clamp. it will take a little bit of twist and pull to get that hose off. next use your adjustable wrench and pliers to unscrew inlet copper tubing from the valve unit. the old valve should now be free from the DW. replace in reverse , remember to use silicon tape. I left the bottom panels off for a couple more days to check for leaks. my wife told me that the first washing after the fix did not really clean the dishes as well , but after that everything was back to normal. so perhaps run the machine empty once?
Parts Used:
-
Robert from Flowood, MS
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
upper spray arm fell offunscre
-
salvatore di from Oldsmar, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking
Removed old gasket,placed new one on pressing into place.Very quick and easy.Saw the youtube on how to do it.Unfortunately this was not the problem.now have a new dishwasher same brand.
Parts Used:
-
Lauren from Marietta, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaking from underneath unit
Spotted the source of the leak at the first heating element under the dishwasher. Removed the brass mounting nut and it was cracked. Replaced with new part from PartSelect.com and the leak was fixed. Apparently the heating element gets so hot it tends to crack the mounting nuts, which results in a leak. Delivery time for part said 3-5 days - mine arrived one day after ordered!
Parts Used:
-
Keith from Meansville, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench set
Was this instruction helpful to you?
Thank you for voting!
Water leaking
-
Ron from Brick, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking from around the door bottom
Removed old gaskets, cleaned area with rubbing alcohol and installed new gaskets. I let it sit for an hour and ran a load of dishes. No leaks, very easy fix.
Parts Used:
-
Brian from Shenandoah, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leading from bottom of door
Just like the instruction video. I pulled the old gaskets out, cleaned the gunk that had accumulated and put the new gaskets in. The tub gasket does not require any cutting or stretching. Just make sure it makes the turn at the bottom of the tub so the door seals properly. The door gasket was very simple to replace.
Parts Used:
-
Henry from S Burlington, VT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
upper spray arm falls 0ff
the part was shipped really fast and was a perfect match for the old part. super happy with the results. thank you partselect
Parts Used:
-
randell from manchester, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No water comming into dishwasher.
Cheked supply water line, water there but not getting into machine.Removed screws that hold machine to counter top, lowered adjustable legs and disconnected water line. I turned off power for safety.Pulled machine out about 8 inches to access water valve from the side. disconnect power supply wires, and water discharge hose, remove two screws on valve bracket. Install new valve and reconnect.
Parts Used:
-
thomas from Neptune, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!