Quick Question!

Have you ever purchased from PartSelect.com before?

Models > AW20K3 Maytag > Parts

AW20K3 Admiral Washer - Parts

All parts for the Admiral Washer AW20K3

Below is a list of all parts for the Admiral Washer AW20K3 - Top Loading. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the AW20K3
1-14 of 36
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.42

Lid Hinge

The lid hinge on your washer is connected to the lid and allows it to open and close. If you find you cannot open or close the lid to your washing machine properly, you may need to...

$9.41

Lid Hinge Pin

This lid hinge pin allows a washing machine lid to pivot open and closed properly. The hinge pin may need to be replaced if the lid will not open or will not close. The part is white and made of plastic. This lid hinge pin is just over an inch long, is sold individually, and does not include the mounting screw (consider ordering mounting screw if it rusted or stripped). It is recommended to check the opposite lid hinge pin before ordering because hinges may wear at the same rate. Be sure to not tighten the mounting screw to pin too tightly to avoid breaking the new part.

$5.05

Screw

This screw is less than an inch long. It is a metallic screw that is used for many clothes washers.

$2.96

Screw

This screw is sold individually.

$24.06

Lid Switch Actuator - Black

This is part of the lid switch actuator mechanism and activates the lid switch, when the lid is closed, to start the wash cycle and when the lid is open, it stops the cycle.

$42.93

Lid Switch Kit

The lid switch kit is an assembly for replacing your washer lid switch. The function of this part is to detect if your washer lid is open or closed. If it detects that it is open it will prevent the washer from rotating and agitating until it is closed. This kit includes the bracket, actuator, switch, screws, and wire harness. To complete this installation, you will need a number two Phillips screwdriver, and a 5/16 nut driver. Before beginning this repair, make sure the power supply to your washer is disconnected. In order to install this part, you will need access to the rear of the unit.

$11.84

Cabinet Top Hinge

$36.00

Single Front Panel Clip

This front panel clip is just about an inch long. It is green in color and is made of metal. This clip is intended for use with the front panels of washers and dryers.

$4.88

Plate Nut

Door Bumper

This bumper cushions the washer door from the cabinet. They are sold individually.

SCREW

DISPENSER, BLEACH

BUMPER- CA

Top-Load Lid - White

All Parts for the AW20K3
1-14 of 36