Models > ASD2575BRB01 > Instructions

ASD2575BRB01 Amana Refrigerator - Instructions

All Instructions for the ASD2575BRB01
16 - 30 of 418
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
40 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Shelves
I ordered the parts, three days later they were in my hands, and installed in the door of the refrigerator. Total time, two minutes! Perfect fit. Ordering the parts was the easiest thing I have ever done. This site is the best! Thank You!
Parts Used:
Refrigerator Door Shelf Bin - White
  • Russell from Twin Peaks, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
32 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker would only deliver crushed ice not cube's
Switched Electric breaker to off. Removed all food and ice cube tray from freezer. Remove 4 screws on soleniod cover in rear of freezer. Removed two screws, two elec connectors from old soleniod and removed. Installed new soleniod. Reinstalled elec connectors and screws, ice cube tray and food. Turned breaker on . Ice maker worked properly.
Parts Used:
Soleniod Assembly
  • MICHAEL from NORTH PORT, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
36 of 53 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace a hose connector at the base of my refrig/frreezer
Perhaps a helpful hint:

When aI received the hose adapter/connector, I inserted the 2 hose ends only to have water drip from the connection.
I used a utility knife to remove an inch from each side, then reinserted the hoses. That made the differnce. Dry as a bone.

LG
Parts Used:
Water Tube Connector/Union - 5/16 to 5/16
  • Leo from Salem, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
41 of 74 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Shelf Bracket
Removed food itmes on broken shelf. Removed old glass shelf cover. Removed broken shelf bracket. Installed new shelf bracket. Intalled new glass shelf cover. Replaced food items back on shelf
Parts Used:
Crisper Cover with Glass
  • Thomas from Leesburg, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
26 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken meat and vegatable draw
a simple replacement
Parts Used:
Refrigerator Crisper Drawer With Handle
  • douglas g. from roanoke, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
25 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor coupling weld broken
Removed four screws from ice maker motor/light support.Then unplugged electrical plug from side of freezer.Used two slip joint pliers to remove coupler from motor shaft. installed new coupler to shaft hand tight as will tighten as motor is run.Then reversed tear down order.
Ice dispenser works better than when we first got the refrigerator
Parts Used:
Ice Dispenser Motor Coupling
  • HAROLD from SPRING HOPE, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
24 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator side of the appliance did not cool
I discovered that the freezer was not defrosting automatically and the condenser coil was freezing up blocking the flow of cold air to the refrigerator side. I first replaced the thermostat thinking that it would be an easy fix but needless to say it didn't work. My indicator that it was not a successful repair was the continuing blinking of the filter change light on the control panel. Ultimately I had to replace the control board assembly to solve the issue.
Parts Used:
Defrost Control Board
  • juan from Weslaco, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old filter and water line to cold water line
Cut a 1/4 inch off both lines and connect. Changed water filter. Found the water filter at Home Depot for 1/2 The price. Look befor you buy.
Parts Used:
Water Tube Connector/Union - 5/16 to 5/16 Refrigerator Ice and Water Filter
  • James from Phelan, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
24 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fan wasvery noisy.
Removed six screws from cover in the back of the freezer. Removed old fan . Removed power wires from old motor. Unclipped old motor from the mounting bracket. Replaced old motor and reversed the rest of the parts. Done
Parts Used:
Evaporator Fan Motor - 120V 60Hz Evaporator Fan Blade
  • Tracy from Coppers City Bottom, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
22 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door failing to close without being pushed shut
Replaced upper cam piece on bottom hinge and also replaced pivot thimble on upper hinge.
No problems, except pivot thimble glued in place. Had to cut up and pull out with pliers. Everything works like new now.
Parts Used:
Thimble Top Lower Door Closing Cam
  • Kenneth from Greeley, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
24 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drawer
Put new drawer in fridge.
Parts Used:
Refrigerator Crisper Drawer With Handle
  • Jason from Farmland, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
21 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispensor motor would run but would not dispense ice at the door!
To get the coupler off the motor shaft I took two adjustable wrenches and slit the old coupler where it was cracked.The threads on the motor shaft were stripped closest to the motor.I took two thin washers and put them on the motor shaft so the new coupler would not turn down to where the threads on the motor were sripped.Since the threads on the coupler are left hand they keep the coupler tight as the motor turns the dispenser auger to dispense the ice.I was a bit difficult to unplug the wiring harness but got it after we used a screwdriver to keep the tab bent down until the harness was unplugged.
Parts Used:
Ice Dispenser Motor Coupling
  • Larry from Hague, ND
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
22 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator would not come back on after defrost.
The refrigerator would not come back on after the defrost cycle unless I smacked the housing around the controls. Since it would come back on after stricking the housing I knew it must be a sticking relay. I used the exploded drawings from Parts Select to determine how to disassemble the housing. Once the part arrived I swapped it out in about 10-14 minutes. The drawings made the job simple. Thanks Parts Select!!! -neal
Parts Used:
Defrost Control Board
  • Neal from Orangevale, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
21 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Magic Plus stopped making ice
First I removed the icemaker from the freezer by removing two horizontal screws holding it to the side wall, and one vertical screw holding the front to a bracket coming off the side wall. Then I used a flat screwdriver to unlock the electrical plug. (After doing this, I realized that this wasn't necessary at all, and this part could have been changed just as easily without removing the icemaker.) On the front, there is a white cover with Ice Maker Plus. Use a flat screwdriver to unlock the tangs and remove the cover. There are three screws in the corners that once removed, will allow the motor assy. to be gently pulled straight out. On the back of the part, you will see many gold lands that the timer touches. I don't think there was anything wrong with my motor. I had two spots where the gold plating was worn off, so I suspect it was not making contact, and the whole process would stop. Slide the new part in place making sure the teeth on the gears line up (not a big deal), and secure with the screws. Install cover and you're done. Mine has been making ice like it was brand new.
Parts Used:
Icemaker Motor Kit
  • George from Hammond, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
24 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ASD2575BRB01
16 - 30 of 418