Models
>
AKS3080SS
AKS3080SS (PAKS3080SS0) Amana Cooktop - Overview
Sections of the AKS3080SS
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Spark Ignition Electrode
PartSelect #: PS11757464
Manufacturer #: WPY0316773
This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in l...
$47.20
In Stock
Burner Cap
PartSelect #: PS11745641
Manufacturer #: WP8284669
Burner Cap - 6000 BTU
Sold individually.
$55.11
In Stock
Surface Burner Head
PartSelect #: PS11744559
Manufacturer #: WP7504P109-60
Sold individually.
No Longer Available
Spark Switch - 270 Degrees
PartSelect #: PS2194864
Manufacturer #: Y0316705
This part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.
No Longer Available
Bolt - m3x6
PartSelect #: PS11740032
Manufacturer #: WP23001134
This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.
No Longer Available
Spark Module
PartSelect #: PS11740990
Manufacturer #: WP31962701
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
No Longer Available
Top Burner Valve
PartSelect #: PS2033842
Manufacturer #: 31891901
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
No Longer Available
Valve Screw
PartSelect #: PS3651486
Manufacturer #: W10491986
Part might differ in appearance, but functions same as original. Sold individually.
No Longer Available
Questions And Answers for AKS3080SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the AKS3080SS
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Electrode, no spark
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Parts Used:
-
HUY from ALISO VIEJO, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
51 of 61 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would not ignite when control in "light" position
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec
... Read more
trode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.
Read less
Parts Used:
-
Michael from Friendswood, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
22 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch Spark would not stop sparking.
I was able to remove the top cover by unscrewing 10 srews. Once the cover was off I removed the plastic shield above the damaged switch. Then unplugged the 2 wires off the switch. Pulled the faulty switch out. Replaced it with the new switch and plugged in the 2 wires. Reinserted the plastic cover put the top cover on and put the screws
... Read more
in place. Tested the new switch and worked fine.
Read less
Parts Used:
-
Anthony from Fishkill, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!