280957-1-M-GE-WK10X10006 -MICRO SWITCH Assembly
Part Location Diagram of WK10X10006 GE MICRO SWITCH Assembly
See part 14 in the diagram
( Grid squares measure 1x1 inch )
280957-1-S-GE-WK10X10006 -MICRO SWITCH Assembly 280957-2-S-GE-WK10X10006 -MICRO SWITCH Assembly Part Location Diagram of WK10X10006 GE MICRO SWITCH Assembly
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

MICRO SWITCH Assembly WK10X10006

 Fits your AHH40LJG1!

Rated by 1 customer 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 18.63
  Special Order
 Fits your AHH40LJG1!
PartSelect Number PS280957
Manufacturer Part Number WK10X10006
Manufactured by GE
Troubleshooting
This part works with the following products:
Dehumidifier.
This part works with the following products:
General Electric.
Part# WK10X10006 replaces these:
AP3188800, 947580
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
De-humidifier would not shut off....bucket overflowed
I knew it was the microswitch. It's internal spring was shot. Getting to it was not a picnic. Remove knobs up top (as well as red plastic dooley that reflects the light telling you the "bucket is full". Remove cover (screws)...a bunch of them. I put down newspapers on my ping pong table so I could easily turn the thing as I was taking it apart. Disconnect (slide off) the three wires that go to the microswich. No need to mark them. All 3 slide off at once. There's a Phillips screw that connects the microswitch assembly (red button) to the microswitch itself. No nut....just the machine type screw. When you remove it, the microswitch swings away from the assembly, and you can remove it. If your problem is just the microswitch, merely put the new one in (unscrew the new one from the new assembly) in the same spot as the old one.
If you insist on replacing the whole assembly, which really isn't necessary, do the following so you can access the back of the red button. Remember, the assembly is still locked to the machine itself, compliments of a standard 1/2 inch nut on the back of the machine where the bucket usually is. Fear not! The BACK of the button going through the machine sits inside the assembly because of two "fingers". Squeeze them together with needlenose pliers and the button will come out on the other side (the back of the machine). Now you can unscrew the 1/2 inch nut from the assembly (back of the machine) and take out the assembly from the "wires" side. Remember: GE sells the whole thing to you...microswitch + assembly. You have a choice. Leave the darn button where it is.....take the new part and unscrew the Phillips screw. take the microswitch ONLY and put it back where the old microswitch was and pick one Phillips screw and attach the microswitch to the assembly ... or ... replace the whole thing. Had I known in advance, I'd have just replaced the microswitch itself. Much easier. Obviously, use care in replacing the cover over the machine. You don't really want to hear freon spraying all over the place because you got frustrated. Bottom Line: I spent $22.48 to repair a machine that sells for over two hundred bucks.
Read less
  • Harvey from Bridgeton, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS280957
Manufacturer Part Number: WK10X10006
Brand
Model Number
Description
General Electric
AHG30L
Dehumidifier - GE Dehumidifier Model AHG30L Parts
General Electric
AHG30LAG1
Dehumidifier
General Electric
AHG30LBG1
Dehumidifier
General Electric
AHG30LCG1
Dehumidifier
General Electric
AHG30LDG1
Dehumidifier
General Electric
AHG30LEG1
Dehumidifier
General Electric
AHG30LFG1
Dehumidifier
General Electric
AHG30LGG1
Dehumidifier
General Electric
AHG30LHG1
Dehumidifier
General Electric
AHG30LJG1
Dehumidifier
General Electric
AHG30LKG1
Dehumidifier
General Electric
AHG40FCG1
Dehumidifier
General Electric
AHG40FDG1
Dehumidifier
General Electric
AHG40LBG1
Dehumidifier
General Electric
AHG40LEM1
Dehumidifier
General Electric
AHG40LFM1
Dehumidifier
General Electric
AHG40LHG1
Dehumidifier
General Electric
AHG40LJG1
Dehumidifier
General Electric
AHG40LKG1
Dehumidifier
General Electric
AHG50LBG1
Dehumidifier
General Electric
AHG50LCG1
Dehumidifier
General Electric
AHG50LEG1
Dehumidifier
General Electric
AHG50LHG1
Dehumidifier
General Electric
AHG50LJG1
Dehumidifier
General Electric
AHG50LKG1
Dehumidifier
General Electric
AHG65LKG1
Dehumidifier
General Electric
AHH40LHG1
Dehumidifier
General Electric
AHH40LJG1
Dehumidifier
General Electric
AHW30LHG1
Dehumidifier
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
MICRO SWITCH Assembly
$ 18.63
  Special Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.