AFI2538AES Amana Refrigerator - Instructions

Pried out the old switch with small screwdriver, popped in the new one and tah-dah!! ..the light came on. While I was at it, I cleaned out the freezer :). I cannot begin to imagine what a repairman would have charged for this.

I did not do the repair my husband did but it only took him 20 minutes and it was done. I am especially thrilled with the fact that the part came the very next day without paying for extra postage. Thank you for your quick response. In fact I ordered a filter for the same fridge the same day from a different parts place and it still has not arrived and its been more than 10 days. Guess who gets my business in the future for appliance repairs.

Parts arrived in less than 2 days. Installation was easy. The only tricky part was removing the Temperature/Humidity control from the old part. A little "bending" of the plastic is necessary to remove the slide mechanism. After that, it was quite easy.

Took off (by removing sockets)each side of existing pantry end caps and put new ones on Should have taken picture of the right side as it was a little problem getting everything back together. Paid $200.50 to have it done the first time it broke. Basically saved $200 doing it ourselves.

Same way I repaired it before.

I removed the upper crisper drawers. I then removed the bottom crisper drawer. I then removed plate glass covering that covered the bottom crisper drawer. I removed the plate glass frame in order to be able to get to the 3 screws holding right hand rail. I removed the 3 screws with nut driver to remove rail. I detached the humidity control linkage and linkage cover from right hand rail. I reinstall every thing in reverse of how I had just taken things apart when installing new right hand rail. There was a lot of good information on how to replace rails that came with rail order. also there was a lot of good information on iste where part was ordered from. THANKS

My husband and I purchased a used refrigerator from a friend who is moving into a new home. Some interior parts were missing but it was very easy to find replacement parts from Parts Select. Everything arrived in good shape and shipping was really quick. The refrigerator is now as good as new.

My husband removed the crisper storage drawers and the shelf then removed the pantry drawer. The broken end cap was very easy to remove, just remove two screws and the new one was installed. Simple and my husband really enjoyed saving $2400! That was what a new one would have cost if he could not have replaced the part!

followed the instructions. Very well written and easy to follow

remove drawers , shelf, and end cap. be careful to look at crisper control mechinism. 2 screws attach end cap to refrigerator.remove all atachments from old end cap and re install on new end cap.re install into refrigerator.

When the new part arrived we snapped on the new one. Just make sure the draw is closed all the way before closing the refrigerator doors, that's is how mine got broke.

removed pantry drawer ,glass top, and the 2 crisper drawers. Removed 3 screws , removed broken one. Removed temperature slide and placed it on to new one. Screwed new one in! Easy Peasy!

Begin by removing, in order: crisper drawers, glass shelf above pantry area, and pantry flip door (which rotates on the pins connected to the pantry end caps). Then remove LH end cap using 1/4" nut driver or socket. End cap is held in place with 3 screws. Once removed, use phillips screwdriver to remove steel slide rail from old pantry end cap and install on replacement end cap. Reinstall all parts in reverse order.

I had to disasemble the crispers and remove the runners and side panel. I needed a screwdriver and wrench set (metric). Once I found the correct socket, everythig went very smooth. My husband was amazed that I could make the repair by myself. I probably saved $200!! The part fit perfect and it was alos very good quality. Thanks

Removed old pantry end and installed new. Was easy.