Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the ro...
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate...
This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM swit...
The thermal cut-off (Dryer Thermal Cut-Off Fuse Kit, Dryer Thermal Cut-Off Kit) prevents the dryer from overheating when the dryer high limit thermostat fails in a closed circuit condition. This part ...
A dryer high-limit thermostat (High Limit Thermostat, Hi-Limit Thermostat, Dryer High-Limit Thermostat) is a switch that is actuated by temperature change. This high limit thermostat acts as a safety ...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
This is a genuine OEM replacement rear drum seal for your dryer. This seal is made of felt and comes with the adhesive required for installation. The purpose of the seal is to prevent hot air from esc...
This push-to-start switch activates the dryer when the button is pressed and released. If your switch is not turning on or off, will not start, or the contacts inside the switch are shorted out, it is...
$18.31
In Stock
Questions And Answers for AED4475TQ1
Ask our experts a question about this model and we'll get back to you as soon as possible!
17 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Riha
January 9, 2020
Dryer heats sometimes at high heat setting but doesn't work on other settings. Turn the knob a few times and it may heat. All thermostats were changed so i think it is the timer.Is this very common?
For model number AED4475TQ1
Hello Frank, thank you for your question. Yes, if the unit is not heating all the time, the issue could be with the timer. If the element was tested, and the thermostats were replaced the timer would be the next part we would recommend replacing. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Sherri
December 31, 2019
My dryer started not shutting off when the door was opened and now will not start.
For model number AED4475TQ1
Hello Sherri,
Thank you for your question. Our sources suggest replacing the dryer door switch for your model under part PS11741701 to fix the issues with the dryer. We hope this helps!
My dryer is not drying clothes well it heats but not real hot could this be a element
For model number AED4475TQ1
Hello Steven,
Thank you for your question. Our sources suggest it is likely the thermal-cut off kit under part PS334299 for your model that would need to be replaced to fix the issues. We hope this helps.
Hi, i put on the thermal cutoff kit #279816 now my dryer wont start
For model number AED4475TQ1
Hello Michelle,
Thank you for your question. Our sources suggest replacing the dryer door switch under part PS11741701 for your model to fix the dryer issues. We hope this helps.
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back
... Read more off.
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open an
... Read mored when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
![Replacing the Multi Rib Belt - 92-1/4"](https://img.youtube.com/vi/PF90f-1kdNY/maxresdefault.jpg "Replacing the Multi Rib Belt - 92-1/4"")
