Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ADW862EAS (PADW862EAS0) > Instructions

ADW862EAS (PADW862EAS0) Amana Dishwasher - Instructions

All installation instructions for ADW862EAS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the ADW862EAS
691-705 of 843
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Heard a grinding noise when the dishwasher was running

  • Customer: Robert from Key West, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I twice watched the 5 minute video on PartSelect on how to repair the Discharge Pump Housing. I disassembled as instructed. One thing I did that the video did not suggest is that I marked the alignment of all parts with a pencil before removing any screws. In the end it only mattered on the main housing that covers the filter. That has to be put back on the way it came off. The repair is complete and for under $50 the dishwasher is running great and quieter than I can ever remember.

Wheel had a broken cross-lock, tines rusted through

  • Customer: Dan from Sacramento, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snap out the old and snap in the new. About that easy. I wish the third part I ordered was still available...

spray arm would not stay in place

  • Customer: Gwen from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just snapped in plastic retainer and works just fine now

Part worn out, needed to replace

  • Customer: Ronald from Tulsa, OK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
No repair, just an replacement. Would recommend this company for good service.

weak spray was leaving the dishes uncleaned

  • Customer: Edward from La Habra, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
removed the lower dish basket; used pliers to undo the lock screw. removed the lower spray arm, transfered heat shields from old part to new, replaced the lower spray arm, hand tightened the lock screw, replaced the lower dish basket....DONE!

lack of two wheels

  • Customer: Michael from Scottsdale, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replacement part has only 6 wheels. The original part has 8 wheels. The lack of the two extra wheels allows the dish rack to get stuck in the space between the inside of the dishwasher and the door. The extra set of wheels allows the rack to bridge the gap. It is a problem even if you put the rack in the other way around only a bit worse to deal with. The part was designed with four sets of wheels for a reason.

Water was leaking around the door

  • Customer: Paul from St. Louis, MO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Following the instructions provided on line, I replaced the door gasket

broken silverware basket

  • Customer: dixie from shawnee mission, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took old one out and put new one in.

Leaking water on floor, right side

  • Customer: Arthur from Aitkin, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Removed gasket using needle-nose pliers, replaced with new gasket using just my fingers, process took a few minutes. Leak is gone.

Silverware basket replacement

  • Customer: Mike from Wheat Ridge, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The silverware basket in my Maytag portable dishwasher was pretty flimsey. The replacement basket I got here seems more durable and I'm very happy with the quality. Shipping was fast and it was packaged very well!

dishwasher gasket worn out.

  • Customer: Barbara from Yorba Linda, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Gasket on my Maytag dishwasher was not making a good seal. I found PartSelect online. Entered my model number and make. Placed my order and received it the next day. The cost of the part reasonable. The website user friendly. Love PartSelect.

The new parts were not identical to the old parts

  • Customer: Roger from Sparks, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
By careful thought I managed to make everything fit.

old warn out cracked hose.

  • Customer: Ernest from Tucson, AZ
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Removed lower panels. Raised front feet to move dishwasher out from under counter. Kitchen had been retiled over old floor. Loosened hose clamp at washer drain underneath and at garbage disposal. Pulled old hose out. Feed new hose through access hole under counter and proceeded to reconnect new hose at proper locations with hose clamps. Pushed washer back. Readjusted front feet to level washer. Reinstalled lower panels. Loaded washer and ran. No leak, no problems.

Water leak in the door. Old casket

  • Customer: John from Conroe, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
It took less then 10 minutes to rplace the new gasket. I think that Maytag is way ahead of the competion on this. The Dishwasher is now back to working and no more leaks.

Bad washing, spotted dishes, water finally stopped filling

  • Customer: Timothy from Wakeman, OH
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Disconnect power. Turn off water supply. Removed front lower cover (4) screws. Disconnect solinoid quick connectors. Remove/disconnect inlet water line. Remove outlet hose. Remove mounting screws. Replace valve.
All Instructions for the ADW862EAS
691-705 of 843