ADB1500AWW Amana Dishwasher - Instructions

Removed the inside door panel. Removed old, broken latch. Disconnected the two wire plugs. Connected the wire plugs to the new latch. Installed new latch into door. Replaced inside door panel.

easy to do unscrewed the plastic on the inside of the door lifted it out of the way takeing care not to damage the wires that are connected to it for the soap dispenser. the old latch fell right out the 4 wires where a bugger to get off and i actually destroyed the switches while unhooking the wires i plugged the wires into the next latch that came with new switches put everything back together and i open and closes like brand new

removed inside panel disconnected switch replaced with new handle and switches.

Works great

Removed the upper spray supply manifold and the lower spray arm, and all other pieces to reach the chopper assembly, removing those pieces, installing the new pieces, and put everything back together. Success! The dishwasher is working as good as new.

i simply removed the screws holding the cover ithen removed the old handle by removing the electrical wires i then plugged the wires onto the new handle i then placed the handle back on the machine replaced all the screws plugged the unit back in and the little lady was so happy she could wash dishes again she bar-b-qued me a big t-bone steak for dinner. THANKS PARTSELECT YOU SAVED THE DAY.

Popped the wheels on just like the ones that were still there and it was good to roll. Nice!

installed rack stoppers. Didn't use tub wheels but fixed old (as best I could) didn't want to spent the money for rack adjuster at this time(wheels are part of rack adjuster assembly)

The 2 harness connectors to the switches would not come off. I had to finally remove the 2 new switches from the new handle/latch assm. and plug in the old ones with the harness bables still attached to them.This worked fine and resolved the door problem. Unfortunately, I am now forced to use the old original switches while the new switches remain in the shipping box. If the old switches go out, I have no idea how to remove the connectors so I can attach them to the new switches.

To open "stuck door", with right hand around upper right top edge of door and with left hand push directly inward on handle then pull out with right hand. It is a little tricky to do, but door will open. Turn off power to dishwasher. With the right size torx driver, remove the stainless steel screws around inside perimeter of door, left, right and top. Lift out inner door, which has a clip holding some wire in middle, so can;t lift all the way off. Lift it up enough to just "lift out" door handle/switch assembly. With power OFF, grab plug connectors and pull of old handle. Mine were very tight, and kind of rocked connector down and up while pulling and came right off. Plug wires into new unit, lay in place of unit removed just alighning to two pins. Lay inner door back in place, put screws back in, and you are done. VERY easy repair.

Removed door facing screws, unpluged switch wires, attached wire plugs to new switches on handle and replaced screws. Finished.

Turn off electric breaker to dishwasher. Remove all star head screws from inside rim of door pannel. Disconnet electric connetions (somewhat difficult-had to use pliers)from old handle then attach to new handle set in place. Srew door panel back on. Turn electricity back on.

Opened the dorr, removed the inside panel = the most time consuming part - and then exchanged the handle assembly. Then replaced the panel. Snap!
The hardest part was determining the part that I needed - the right part that did not involve repairing the/an assembly. Luckily I got the right one and two un-needed parts.

Stuff happens.

removed top row of screws and two down each side. unplug electrical connectors. reverse operation. the amazing thing was i ordered the part on-line wed. , the day before thanksgiving, and it was here via fedex on friday, two days later. funny how some repair services tell you the parts are out a week to ten days!

Pried door open. First ordered the wrong part...latch assembly with no handle. Reordered proper part and installed it in no time. Ordered regular shipping (cheapest) and in both instances parts were there in two days via Fed Ex. Very quick getting the parts to me.
Removed half of the screws on inside of door and used pliers to unhook assembly from the two power connectors and then popped new one in place by hand. All repairs should be this easy. I will use this company again for all appliance parts needed.

The latch that opens the door to the diswasher was broken. It became difficult to open the dishwasher door.

A quick search on the internet using the machine make and model took me to Partselect.com. Another quick seach of the exploded views of my dishwasher gave me the part number and a few more clicks had it on order.

I recieved the part buy the end of the week. and had it installed within 15 to 20 minutes and I was up and running.

What a deal!!! Thanks