ADB1200AWS Amana Dishwasher - Instructions

Very easy to find and order the part I needed. The hardest part was opening the box when it was delivered. Very good service and great site to find replacement parts.
Richard Mulligan

It was a silverware basket......I picked up the old one, replaced it with the new one. It was a perfect fit. It could not have been easier.

Looked you up; ordered; part came quickly.
Thank you!

I first took of the inside door panel approx 9 screws. The latch assy was the top of the door panel that I took off. Took the wires off both side of the assy and attached them to the new assy. I re-attached the inside door panel. it was a very easy fix. No other dealers in the area had the part. I order the part from parts select and was back in action within three days.

opened the door and put it in

Took out the old basket, dropped in the new basket.

All I had to do was remove the handle from the current silverware basket (pried loose a couple of "teeth" with a pair of screw drivers) and push the handle on the new basket. Took longer to find the screwdrivers than it did to move the handle.

Thank you!

Removed the 11 torx screws from the door panel and separated the inner door from the outer panel to expose the latch mechanism. Killed power to d/w, unplugged the two interlock switches from the old latch and removed it. Installed the new switch assembly and reconnected the switches. Easiest repair job ever - took less than 10 minutes. Only catch is that you need a T-20 torx driver for the screws.

Replaced the basket!

just took out the old one and put in the new one

Removed screws holding inside liner to door. Seperated the two revealing latch assembly. Removed two electrical plugs from latch. Installed plugs on new latch assembly. Put door and liner together and reinstalled screws with screw setting of driver on lowest torque setting. Hand tightened and tested. Whole job less than 10 minutes. Super easy, wife impressed!

Removed all the screws holding the shroud, filter, wash arm, etc. Installed new shaft and chopper blade, then reinstalled impella on new shaft as described on the easy to follow instructions.

just had to remove the stoppers and slide the track on and then replace the new stoppers.
most of all i was pleasantly surprised at how fast the parts arrived. i ordered them thursday morning and i was installing them friday morning .

piece of cake. you need the special screw driver bit to take the back panel off the door, Then take the wires off and put the new assemble in . button up and you are done.

Replaced the basket which was difficult to find