Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ADB1200AWS > Instructions

ADB1200AWS Amana Dishwasher - Instructions

All installation instructions for ADB1200AWS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the ADB1200AWS
391-405 of 746
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Handle

  • Customer: Jeff from Vancouver, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Removed screws holding inside liner to door. Seperated the two revealing latch assembly. Removed two electrical plugs from latch. Installed plugs on new latch assembly. Put door and liner together and reinstalled screws with screw setting of driver on lowest torque setting. Hand tightened and tested. Whole job less than 10 minutes. Super easy, wife impressed!

no water being pumped thru any of the 3 wash arms

  • Customer: Dennis from Raymond, NH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 1 people found this instruction helpful
Removed all the screws holding the shroud, filter, wash arm, etc. Installed new shaft and chopper blade, then reinstalled impella on new shaft as described on the easy to follow instructions.

track was spread open and the stopper would fall off

  • Customer: Paula from Freeland, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
just had to remove the stoppers and slide the track on and then replace the new stoppers.
most of all i was pleasantly surprised at how fast the parts arrived. i ordered them thursday morning and i was installing them friday morning .

broke the latch

  • Customer: Robert from Sorrento, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
piece of cake. you need the special screw driver bit to take the back panel off the door, Then take the wires off and put the new assemble in . button up and you are done.

Basket was worn out and the bottom was falling apart

  • Customer: James from Georgetown, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Replaced the basket which was difficult to find

latch had broken off inside

  • Customer: RG from St Simons Island, GA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
removed all the torx screws that hold the inside panel to the door. Removed the latch/switch.[Don't forget to turn off the power] Could not remove the wiring harness from the micro switch so I removed the old micro switches from the old switch and moved them to the new switch, harness and all. repositioned the latch and reattached the panel.
there are two latches available. I ordered the wrong one at first. Got the correct one in just two days. Was able to return to wrong one for credit.
Great service. Glad I didn't call a repairman.

Latch was broken and door would not open

  • Customer: Randy from Hillsboro, NH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I had to push at the old latch with a screw driver to get the door opened and then removed about 14 screws and opened the back of the door, removed the two wires from broken latch. Replaced the wires to new latch, set in place and replaced the 14 screws closed the door and was is good as new.
Easy as pie.

the dishwasher in the new house that i had just purchased had no basket for the silverware

  • Customer: costas from north providence, RI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
first i opened the door. then i proceeded to pull the lower dishrack out of the dishwasher. I then placed the new silverware basket into the center position for the basket. After replacing the basket i pushed the rack back into the machine and closed the door.

latch handle broken

  • Customer: Mark from laguna niguel, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 1 people found this instruction helpful
the removal of panel was simple, the removal of electrical connections was difficult even with a little wd 40 i was nervous when any metal part is attached to a plastic part. it didn't want to let go but my suggestion is to work the connecter back and forth forward and back to get it started then with a firm grip on the wire harness with pliers pull the two apart with pliers. good luck!!!

Dishwasher difficult to open due to broken latch

  • Customer: Luke from Twin Falls, ID
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Disconnect power first. Removed all the screws on the inside of the door, pulled the inside part of the door away from the front part to gain access to the latch, disconnecting the wires was the most difficult part since the connectors didn't want to slide off the metal tabs very easily, replaced the latch and put everything back together. When I ordered the part, I wasn't sure if it was going to be just the handle, but I was glad it was the entire latch assembly.

old baskt-ware basket had holes in it

  • Customer: KC from Kennewick, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
I ordered the part for a 15+ year old Maytag dishwasher. It came in just a few days with normal shipping. I put in the new part and tossed the old one. I was shocked that I could get the exact replacement part in such a short time.

Thank you PartSelect!

needed dishwasher basket

  • Customer: thomas from sparta, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
just put into dishwasher

Latch was broken

  • Customer: Marilyn from Pauma Valley, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 1 people found this instruction helpful
I removed the screws from the door, popped out the broken part, installed the new door latch and replaced the screws. The repair was fast and easy. Reading others comments about how to do the repair here helped a lot. Ordering from this company and finding the correct part couldn't have been easier. I feel fortunate to have stumbled upon this website. Fixing this on my own saved me a lot of money. Just for kicks I checked online with Sears. I found the part but they would not let me order it, I would have to request someone to come out and repair it for me, LOL! Thank you Part Seclect!

old basket had hole in bottom

  • Customer: philip from clemmons, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
replaced with new basket

It was too easy.

  • Customer: Ron from Roanoke, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Matching the part I had in my hand with the picture online was a cinch. Rec'd the latch in a few days, and installed it in minutes. Why did I wait so long to look it up and order? At least the kids think I'm a hero for fixing the dishwasher!
All Instructions for the ADB1200AWS
391-405 of 746