Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ADB1200AWQ > Instructions

ADB1200AWQ Amana Dishwasher - Instructions

All installation instructions for ADB1200AWQ parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the ADB1200AWQ
391-405 of 735
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

track was spread open and the stopper would fall off

  • Customer: Paula from Freeland, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
just had to remove the stoppers and slide the track on and then replace the new stoppers.
most of all i was pleasantly surprised at how fast the parts arrived. i ordered them thursday morning and i was installing them friday morning .

broke the latch

  • Customer: Robert from Sorrento, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
piece of cake. you need the special screw driver bit to take the back panel off the door, Then take the wires off and put the new assemble in . button up and you are done.

Basket was worn out and the bottom was falling apart

  • Customer: James from Georgetown, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Replaced the basket which was difficult to find

Basket bottom had broken pieces

  • Customer: Caldonia from Tipp City, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
II took the handle off the old basket and attached it to the new basket. I replaced the old basket with the new one in the dishwasher.

the top rack of dishes were not getting clean

  • Customer: Ellen from New Patlz, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
the part we received has changed, and so it did not fit our dishwasher after all. i was able to remove one flapper from the part and put it on my old one, and now the water pressure is much better, and the dishes are actually getting cleaned.

Latch handle broken

  • Customer: Brett from Salt Lake City, UT
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 0 of 1 people found this instruction helpful
Removed inner door panel. Removed latch . Removing wire connectors from switches was difficult. Replaced latch. Reassembled. Done.

Lost The Wheels

  • Customer: CODY from DUMAS, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
All I did was put the new wheels on. They were really fast with shipping. I put my order in one day and the parts were there the next.

Replace broken silverware basket

  • Customer: Raymund from Cedar Rapids, IA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
The only tricky part was taking the carrying handle off the broken basket and installing it on the new basket. The handle has three alternating hooks (two on one side and one on the other) that snap into slots in the center partition of the basket. I used three butter knives to push out the hooks from the slots so that I could remove the carrying handle. Once removed, the carrying handle snapped into place on the new basket fairly easily.

Handle on dishwasher broke

  • Customer: Craig from Derry, NH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 1 people found this instruction helpful
Couldn't justify having a repairman come to the house for a 5 year old appliance, so there was nothing to lose by trying to do this myself.
I removed about a dozen screws that held the inside door panel to the door, two of the screws held the handle assembly in place. Pulled the wires off of the old handle assembly with a pair of pliers, fastened the wire harnesses to the new assembley and reinstalled the door panel. Repair was simple.

Dishwasher door hard to open

  • Customer: James from Williamsville, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Simple repair. First and most important: Turn off the power at the circuit breaker panel. Next, remove 8-9 torx head screws holding the inside panel on the door. Pull the handle assy. away from the door and unplug the two electrical plugs from the handle. Mark or remember which side each goes on. Plug the two electrical plugs into the new handle assy. and place in back into it's position in the door and reassemble the door panel. Turn the power back on at the breaker box.

Dishwasher door was hard to unlatch

  • Customer: Eugene from Cherry Valley, IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 1 people found this instruction helpful
Unfortunately I’d done this repair before. It seems that this particular part has cheap plastic components inside and seems wear out every 2 or 3 years. The fortunate thing is PartSelect stocks this part, ships it quickly and it’s an easy repair. Just take the screws out of the inner door liner and pull out the latch, disconnect the wires and reconnect to the replacement and screw everything back like it was. Took me 10 minutes.

Hole in the basket

  • Customer: Jonathan from Flushing, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Switched out the parts--super easy. Perfect replacement part and fast delivery. Great!

latch switch seemed to be stuck & when setting wash options when door was open, water would start to fill the washer

  • Customer: Anthony from Litchfield Park, AZ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
I removed the screws on the interior door cover plate, pulled the cover plate back which exposes the latch switch. I then pulled the two electric connectors off the switch, swapped out new switch, reconnected electric and put the screws back in. Simple repair which took not more than 15 minutes and solved the problem.

Handel broke that opens diswasher.

  • Customer: James from Swanton, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
All screws are on the inside of the dishwasher.Not a good place when the washer is closed and the handle breaks.Had to take a box cutter and remove some plastic in the handle area to be able to remove broken handle and open dish washer.Once open this repair is a piece of cake.2 wires and a hand full of screws.

The top track rail broke so had to replace with new ones so we could slide the top rack in and out.

  • Customer: Jerry from Vista, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
First emptied and removed the rack from the dishwasher. then removed the broken track rails. and the end posts from the broken track rails. Put one end posts in the track rail and then placed track rail onto rack and placed in the washer. Then placed the other end posts so the track rail would stay in place when pulled out.
That was it
All Instructions for the ADB1200AWQ
391-405 of 735