Switch to Classic
Models > AC0752XT0 > Instructions

AC0752XT0 Whirlpool Air Conditioner - Instructions

All Instructions for the AC0752XT0
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
switch shaft was broken.
ordered new part, removed old unit, noted where wires connect, installed new one, done.
Parts Used:
Selector Switch
  • John from Burton, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
22 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
screw holes didn't line up
I received the part the very next day which was awesome, but when I went to install it, there was a connection discrepency on the back of the switch, and the screw holes were completely off in the front where it connects to the unit. I ended up taking the whole thing apart to try to put the old face with the right screw holes on the new part and ruined it.
Parts Used:
Selector Switch
  • Dena from Coral Gables, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Control Of Temp.
The part was easy to remove and replace. Instructions were easy to understand. Once removed and replaced. The a/c worked great. I could control the temp and not be freezing all the time.
Parts Used:
Temperature Control Thermostat
  • RICHARD from SAN ANTONIO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
23 of 155 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the AC0752XT0
1 - 3 of 3