Models
>
96143010600
96143010600 Husqvarna Lawn Mower - Overview
Sections of the 96143010600
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Cover, Dust, Wheel
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
In Stock
Bolt, Handle
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
In Stock
Lawn Mower Blade Adapter
PartSelect #: PS9982439
Manufacturer #: 581851501
This blade adapter is for lawn mowers.
Blade adapter attaches the mower blade to the motor shaft.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
$13.69
In Stock
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
In Stock
Hardened Washer
PartSelect #: PS9019116
Manufacturer #: 532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mowe...
$4.99
In Stock
Questions And Answers for 96143010600
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear drive wheels bald, no traction
9/16s inch socket, something to prop up one side of the mower (I used a plastic plant pot), and about 5 minutes was all that was needed. Undo the nut on the wheel, remove, replace it with the new one (can't mess it up - just goes on one way which is extremely obvious), replace and tighten the nut -- done. Just that simple. With the new
... Read more
kicks it goes up hill like a champ now (instead of spinning, especially with the grass catcher attached).
Read less
Parts Used:
-
Mark from COLUMBUS, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRIVE CABLE BROKEN
-
jerome from ANNISTON, AL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
3 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!