Models
>
96143010500
96143010500 Husqvarna Lawn Mower - Overview
Sections of the 96143010500
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Wheel
PartSelect #: PS9016096
Manufacturer #: 532401274
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower.
A wrench is required for replacement of this part.
$34.86
In Stock
Cover, Dust, Wheel
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$4.99
In Stock
Bolt, Handle
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.99
In Stock
Lawn Mower Blade Adapter
PartSelect #: PS9982357
Manufacturer #: 581473301
This blade adapter is for lawn mowers.
Blade adapter 581473301 attaches the mower blade to the motor shaft.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
$13.69
In Stock
E-Ring 7/16
PartSelect #: PS9145393
Manufacturer #: 812000058
The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers t...
$3.99
In Stock
Nut, Hex, Flangelock
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$4.99
In Stock
Questions And Answers for 96143010500
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socke
... Read more
t. It was a very easy repair.
Read less
Parts Used:
-
Russ from ALTENBURG, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
9 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!