Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Heribert
April 1, 2023
A switch (has a part number 50 54073 042 engraved on the metal top of the switch) is defective. It belongs to an old KANMORE cook-top on which the switches are all attached in a row on the right side. The broken switch belongs to a burner that has 2 heating surfaces: an inner, smaller one and one that heats a larger surface in addition to the inner one.
I found a switch (optically identical) with your company, but these have the part numbers 5054073041 or 5054073043. My question: Can I buy and install one of the switches in place of the defective switch with part number 50 54073 042?
For model number 79040503601
Hello Herbert, thank you for your question. The numbers that you have provided are not part numbers so they are not part of looking up the parts. The switch for the middle (oval shape that has two burners) called a bridge is part PS1529264. The switch for the Dual ( Front right and left) is PS899921. We have great videos to drawn on for installation. We are pleased to have been able to help.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede
... Read mored are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Removed screws on the sides and front. Labeled the wire sets connected to the front control panel. Gently lifted up the stove top and flipped it over on to a towel. Removed the piece of metal holding down the burner. Disconnected the cables to the old burner. Repeated steps above in reverse.
