Models > 700DRT > Instructions

700DRT (700 DRT 96093000402 -2008-01) Husqvarna Tiller - Instructions

All Instructions for the 700DRT
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Spring on clutch cable broke
Remove L. wheel.
Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test
Parts Used:
Cable, Clutch
  • David from SKANDIA, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced old belt
took cover off and replace belt
Parts Used:
Belt, V
  • David from WINSTON SALEM, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set, Wrench set
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 700DRT
1 - 2 of 2
Back to Top