Models > 61004754 > Instructions

61004754 Kenmore Refrigerator - Instructions

All Instructions for the 61004754
76 - 90 of 136
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice dispenser door replacement
My part was received in only 3 days. It was exactly what I need. The directions sent with the ice door were really simple to follow. Within 30 minutes my family was back to getting ice from the refridgerator door. Nobody wants anything to tear up, but I hope if I do have troubles in the future, it's something that partselect carries parts for. These days it's hard to find a business that gives you want you want, quickly, for a fair price. If you were a movie I would give you two thumbs up. Thanks for making this a good outcome and not just another headache!!
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Darryl from Corbin, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker chute door broke off
Easy to install and it works fine. Recommend using the instruction manual and it was a breeze
Parts Used:
Roll Pin Ice Dispenser Solenoid and Door Kit
  • Merle from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic flapper broke
Replaced flapper, and solenoid per the instructions. It was much easier than I had anticipated. The hardest part was reconnecting the control wire to the front panel. Not much room to get your hands in there, but it finally went together...
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Stanley from Houston, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dispensing closing flap broke off
Ice Dispense Repair on front door:
Just followed the directions to remove that front panel, removed the screws, as needed, to take out the unit. The new parts installed easily, in fact, much easier than I thought it would be. Just re-assembled unit and was back in business...
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Art from Scottsdale, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice door tab broke off
The parts just arrived -- wow, I think I've found my favorite parts supplier!!!

Ironically, I had jury rigged a new tab on the ice door by inserting a screw into where the tab snapped off, but it didn't work! As I was taking it apart this time, I realized that the solenoid spring had become unclipped. However, it's nice to have it all back together again and working with new parts!

Thank you -- great packaging, the parts look fantastic, and a great sheet of instructions! I've already repaired my refrigerator (only took about ten minutes) and it's up and running!

Thank you!!
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Jamieson from Spring, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice door wouldn't open
Installed solenoid kit.
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Chris from Peoria, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice door broken
Followed instruction provided. Ice door only part required.
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Roland from Vallejo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our ice dispensor door was broken
Ordered the Ice Dispenser Solenoid & Door Kit and replaced the broken door and solenoid - easy with the right parts - FMS
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Fred from Chesterfield, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser door borken
Most importantly, watch the video.Made installation real simple. Better than paper instructions that come with kit.
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Walter from Killeen, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the flapper for the ice dispensor was broken
i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .
Parts Used:
Roll Pin Ice Chute Door Return Spring Ice Dispenser Solenoid and Door Kit
  • richard from dix hills, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door strike was broken on my dispensor
The repair did not work. The new door strike did not embrace the solenoid.

I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.

Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.
Parts Used:
Roll Pin Ice Dispenser Solenoid and Door Kit
  • Pat from Spring, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace Ice Dispenser cover
VERY EASY AND WAS INSTALLED IN NO TIME> Many Thanks J
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Jeffrey from Royersford, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
experienced a failed reostat
Obtained the part from part select in record time. Exact part arrived next day and changed out the faulty part within an hour. great service and have already booked-marked the website should future appliance parts be needed. Fair price too!
Parts Used:
Limit Switch - 2 Terminal
  • Robert from Pipersville, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Flapper from ice dispenser broken
Parts came 2 days after I ordered. Followed the included instructions, removed 4 screws, snapped the new flapper into place, put the screws back and voila - REPAIR COMPLETE!! One of the simplest appliance repairs I could imagine. Thanks Partselect!
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Charles from Coatesville, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door flap of ice dispenser door was broken.
I watched the repair video before I even ordered the part. That helped me determine if I felt I could make the repair. The video was extraordinarily helpful. Can't say enough about it. I even took off the dispenser door to see if I thought I could do it. The part arrived quickly, in just a couple of days. I only needed the door flap but it came with the solenoid which is not uncommon on ordering parts. (I couldn't even find the part on other web sites much less a video on how to repair.) I reviewed the video again. I removed the drip tray and door facing as instructed. When removing the mechanism I did get incur a slight electrical shock. I had not unplugged the refrig. Duh.. Got the mechanism out and inserted the door flap. The solenoid strike bar had come out and I had a slight problem getting that back in but referenced the video and no problem. Put in all back in place. Had to clean out the ice bin some because water had frozen in the bottom. Put it back in, plugged in the refrig and I am back in business! Terrific! The video was the key for me. It gave me confidence with very clear instructions. Bill
Parts Used:
Ice Dispenser Solenoid and Door Kit
  • Bill from WACO, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 61004754
76 - 90 of 136