Models > 592-29212

592-29212 ((0004)) Samsung Washer - Overview

Sections of the 592-29212

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
SCREW-TAPPING;TH,+,1,M4, – Part Number: 6002-000213
SCREW-TAPPING;TH,+,1,M4,
PartSelect #: PS4133148
Manufacturer #: 6002-000213
$4.18
  In Stock
Washer Drain Pump Assembly – Part Number: DC97-19289F
Washer Drain Pump Assembly
★★★★★
★★★★★
(4)
PartSelect #: PS12592631
Manufacturer #: DC97-19289F
The drain pump assembly removes water from the washer during the drain portion of the cycle.
$89.85
  In Stock
LEG-ADJUST;SEW-RA169N,PP – Part Number: DC61-01722B
LEG-ADJUST;SEW-RA169N,PP
★★★★★
★★★★★
(1)
PartSelect #: PS4206427
Manufacturer #: DC61-01722B
This adjustable leg, also known as a levelling leg, is a genuine OEM part supplied by Samsung for use with washing machines. The leg supports the washing machine by ensuring that it is level and balan...
$13.97
  In Stock
MAGNET-R.S;ORCA WASHER,F – Part Number: DC61-03184A
MAGNET-R.S;ORCA WASHER,F
PartSelect #: PS4206980
Manufacturer #: DC61-03184A
$17.81
  In Stock
Water Temperature Thermistor – Part Number: DC90-10128N
Water Temperature Thermistor
★★★★★
★★★★★
(1)
PartSelect #: PS4214274
Manufacturer #: DC90-10128N
The thermistor monitors and helps regulator the water temperature in the washer.
$87.25
  In Stock
Nut-hexagon – Part Number: 6021-001588
Nut-hexagon
PartSelect #: PS4274234
Manufacturer #: 6021-001588
$8.34
  In Stock
Assembly DAMPER;OWM,DF0.9,K0 – Part Number: DC97-05280W
Assembly DAMPER;OWM,DF0.9,K0
PartSelect #: PS11719937
Manufacturer #: DC97-05280W
$48.95
  In Stock
Call (800) Samsung – Part Number: CALL_1-800-SAMSUNG
Call (800) Samsung
PartSelect #: PS17019800
Manufacturer #: CALL_1-800-SAMSUNG
  No Longer Available
SCREW-TAPPING;TH,+,-,2,M – Part Number: 6002-000520
SCREW-TAPPING;TH,+,-,2,M
PartSelect #: PS4133205
Manufacturer #: 6002-000520
$4.18
  In Stock
Water Level Pressure Switch – Part Number: DC96-01703C
Water Level Pressure Switch
PartSelect #: PS4217081
Manufacturer #: DC96-01703C
$84.93
  In Stock
Pulsator Bolt – Part Number: DC60-40133A
Pulsator Bolt
★★★★★
★★★★★
(1)
PartSelect #: PS4205362
Manufacturer #: DC60-40133A
$9.26
  In Stock
Motor hall sensor – Part Number: DC31-00153A
Motor hall sensor
PartSelect #: PS4275935
Manufacturer #: DC31-00153A
$119.25
  In Stock

Questions And Answers for 592-29212

Be the first to ask our experts a question about this model!

Common Symptoms of the 592-29212

[Viewing 1 of 1]
Will not drain
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top Load washer would not drain to complete spin cycle.
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump, a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump.
Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg
Parts Used:
Washer Drain Pump Assembly
  • Greg from Medina, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Easy instal, taking off entire back panels of appliance is required
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine.
Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install pump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Parts Used:
Washer Drain Pump Assembly
  • Dieter from CHICAGO, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer stopping in the rinse and spin cycle
Tipped the washer up on a couple of chairs. Pulled the motor apart in three pieces and replaced the Hall Sensor. Error code lead me right to the problem and solution.
Parts Used:
Motor hall sensor
  • Gary from CENTER HARBOR, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!