Models > 4KHM512TCB0 > Instructions

4KHM512TCB0 KitchenAid Mixer - Instructions

All Instructions for the 4KHM512TCB0
16 - 30 of 38
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer beater broke
No repairs only replaced
Parts Used:
Mixer Beaters
  • Terry from HARRISBURG, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost beaters
Ordered replacements
Parts Used:
Mixer Beaters
  • Marlene from GREENVILLE, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Required replacement beaters
Inserted beaters into mixer
Parts Used:
Mixer Beaters
  • Joyce from JOLIET, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One beater bar broke
Pushed it into the mixer slot
Parts Used:
Mixer Beaters
  • Peggy from PELHAM, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Beaters thrown away by ex-friend and thief
Received the beaters. Opened package and removed plastic. Snapped beaters into place!! Easy as that. It's too bad that KitchenAid doesn't offer much as far as attachments go. I love my mixer. I am not able to afford the BIG stand mixer so...If I wanted to continue using my mixer, I had to buy another set of beaters. I do have to say that the beaters I bought from PartSelect were of superior quality than the original beaters. Well worth it to buy another pair from PartSelect!! Thank you PartSelect!!
Parts Used:
Mixer Beaters
  • Colleen from Sultan, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the 4 blades on a beater snapped at the top end.
I put the replacement beaters in the designated sockets exactly as indicated in the bottom of the mixer body. Essentially the same as every other time I have used this mixer.
Parts Used:
Mixer Beaters
  • Janine from DYERSVILLE, IA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Beater
By buying new beaters.
Parts Used:
Mixer Beaters
  • Kelly from Forest Knolls, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
beater came loose at shaft
when mixer was about 1 year old. Complete beater mechanisum cane loose from shaft. Mom was in the middle of baking some cakes, so I took the shaft and beater down to my garage and drilled a straight hole through the beater collar and shaft the threaded it through and installed a screw which after installing I peened over the ends so it wouldnlt come loose. Thie repair lasted longer than the original part by a lot of years. Now the beater became loose on the shaft and was woobelng so I bought a complete new beater assy.
Parts Used:
Mixer Beaters
  • william from pittsburgh, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One beater came loose from the shaft
Just snapped the beaters into the mixer and it works great.
Parts Used:
Mixer Beaters
  • John from Merced, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Beaters bent
I just snapped in the new beaters and turned it on and they worked perfect. It was a very easy repair.
Parts Used:
Mixer Beaters
  • Kathy from Brainerd, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
One of the tines became loose.
Received the new beaters and put them in the mixer. End of story.
Parts Used:
Mixer Beaters
  • Judy from Northwood, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Beaters Didn't Fit
I thought this fix would be a cinch, but when I tried to insert them into their respective slots neither beater could be fully inserted to the necessary 'clicked' locking position.
Parts Used:
Mixer Beaters
  • Michael from Seattle, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
New beaters for my hand mixer
I love to bake...wash dishes, not so much! I ordered two sets of mixer beaters so I could cut back on the amount of washing beaters between batches. Please feel free to use and share this information.
Parts Used:
Mixer Beaters
  • Judith from Saint James, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
beater broke
Pushed the new ones in - no brainer repair - I just want to say thank you for the prompt service
Parts Used:
Mixer Beaters
  • Alicia from Lansing, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bent beater
put new beaters in and all is well
Parts Used:
Mixer Beaters
  • herman from tavares, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 4KHM512TCB0
16 - 30 of 38
Back to Top