Models > 3510PRW > Instructions

3510PRW Magic Chef Range - Instructions

All Instructions for the 3510PRW
256 - 270 of 339
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I needed to replace my burner pans.
The Drip Pans are a cinch to replace with no tools necessary. The best part is that the Web Site is extremely easy to use, and the parts arrived two days after being ordered.
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • Robert from Wilton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
one pole of the socket corroded to nothing
Starting by me making a substitute prong to keep the stove working while the part this coming by mail. was a piece of cake.
Parts Used:
Surface Burner Receptacle Kit
  • martien from williamstown, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Leveling legs were broken during the summer
The range in my classroom had the leveling legs broke off by the summer staff. I ordered two new leveling legs and the night custodian replaced them in about 45 minutes and them leveled the stove. Parts were just as stated and easy to order.
Parts Used:
LEVELER-FOOT,SCREW,F/S,NYLON
  • Jayne from Willimantic, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Receptacle was no longer making good contact.
This worked out GREAT. We were about to purchase a new range when I found the needed parts were available. The stores we had contacted had told us our range was too old to have parts available. I had no problem with installing the receptacle at all. The pans went in easly as excepted. My wife is happy with her NEW arrangement. She does not need to learn how to operate a new range. Thanks for your help. The instructions sent were clear and easy to follow.
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch Surface Burner Receptacle Kit
  • Fred from Edwardsville, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
oven temp would not heat above 100º
removed old element - replaced with new element - perfect fit Thank you Part Select fast delivery easy installation by using part select online instructions.
Parts Used:
Oven Bake Element
  • Joseph from Malvern, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Oven not heating
First I turned off power to the range. I then removed the oven door for easier access to the rear of the oven. I removed baking pans and 2 oven racks. With a nut driver, I unscrewed the holding screws attached to the rear of oven heating element. Then pull the element forward exposing wire push-on connectors and slide connectors off the element. Reverse the entire procedure, set oven temperature to about 350 degrees to check element function and voila! bake some cookies.
Parts Used:
Oven Bake Element
  • Dennis from Brewster, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
drip pan were burnt out
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Parts Used:
Chrome Drip Bowl - 8 inch Drip Bowl - 6 Inch
  • Delroy from Miramar, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the oven had stop heating at any temp above 200
the 1st thing to remember is to turn off the breaker for the stove then open the oven door and remove the racks and the heating element was there on the bottom undo the screw on each side where the element goes into the back wall of the oven and pull gently out and take your plyers and remove the wire hooked on each end becareful so that the wire does not fall back into the hole place your new element into the oven and plug the wire on the new element and slide it back into the holes and put back the screws and when done you can put the power breaker back on and try it this took less than 15 min.
Parts Used:
Oven Bake Element
  • Harry from Kaplan, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Front burner would not heat properly.
Ordered a front burner but it was not the right size. Ordered a switch after local dealer said I had a bad switch. Ordered a switch from Parts Select and received it the next day. Works good now.
Parts Used:
Range Infinite Burner Switch - 8 Inch
  • Michael from Milton, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
burnt out bake element
I viewed the video you sent [ which will bring me back to you for all my appliance parts ] and could have done the repair in less than 15 min. but one of the leads on my oven was too short so I had to disconnect it from the terminal to connect it to the new element and feed it back through the oven wall and reconnect it to the terminal. I will recommend you with out hesitation. Thanks, Tom P.
Parts Used:
Oven Bake Element
  • thomas from santa fe, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
on Indicator light on all time
Disconnect the range from wall outlet. remove 2 screws in the back of the cabinet,remove switch plug. connect back range to outlet to check if it is the switch. make sure the light isn't on. then I order the switch online at PartSelect.com and it arrived in 2 days. When I installed the piece, the problem had been solved. I hope this information will be helpful for others.
Parts Used:
Range Infinite Burner Switch - 8 Inch
  • Euclides from Orlando, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replaced Oven Heating Element
The oven heating element blew out on Thanksgiving... it went in style sending pieces of molten metal around the oven. After a thorough cleaning and removal of debris I obtained a replacement element. Replacement is easy. There are two screws that loosen the element. The connectors are a push-fit. The oven works great now.
Parts Used:
Oven Bake Element
  • Stuart from Perry, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element burned through and broke
I removed the element by removing two screws. I discarded the old element and installed the new one using two screws - just as shown in the video. I ordered the part and received it in just a few days. The price was good. Very happy.
Parts Used:
Oven Bake Element
  • Gregory from Daly City, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
Remove racks, remove 2 screws, pull element out, disconnect connectors, reinstall new element.
Parts Used:
Oven Bake Element
  • Donald from Largo, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
heating element went out
part was sent quickly and it was easy to remove and replace. also watched video
Parts Used:
Oven Bake Element
  • kim from rockford, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3510PRW
256 - 270 of 339