Models > 327P4
327P4 (2012-10) Husqvarna Pole Saw - Overview
Sections of the 327P4[Viewing 18 of 18]
Keep searches simple, eg. "belt" or "pump".
PartSelect #: PS9020992
Manufacturer #: 537042401This OEM fuel line, or hose, is a 4-inch, clear, plastic tube which is sold individually. It is rated as "Easy" to install. This part connects to the purge assembly and delivers fuel to the carburetor...
Chainsaw Primer Bulb
PartSelect #: PS9282918
Manufacturer #: 503936601This is an air purge for various lawn and garden equipment. The air purge may also be known as the primer bulb, and it is made for small engines. This part circulates fuel into the carburetor of your ...
PartSelect #: PS9022665
Manufacturer #: 537143101This air filter comes in black foam and is rated as "Easy" to install. Installation requires a screwdriver, and the part attaches inside of the air cleaner housing. This manufacturer certified filter ...
Fuel Tank Bushing
PartSelect #: PS11824288
Manufacturer #: 580457501Used to seal the fuel tank to prevent leaks and allow the fuel line to enter through it, this Fuel Tank Bushing is sourced directly from the manufacturer. It is made of black rubber, is not part of a ...
Starter Pawl Bridge
PartSelect #: PS9282878
Manufacturer #: 503873305The Starter Pawl bridge provides the resistance needed for the starter rope to start the trimming engine. It is an OEM part that attaches inside the recoil assembly. If broken due to weaar or fatigue,...
PartSelect #: PS11824881
Manufacturer #: 588171156This OEM carburetor mixes the air-fuel mixture to the proper ratio for combustion in your engine. This carburetor is sold individually, is silver in color and metal in material, and is located on the ...
PartSelect #: PS8990133
Manufacturer #: 503497101This Carburetor Gasket provides a tight seal between the carburetor and insulator. If broken, the engine will run lean due to excess air causing performance issues, and the part should be replaced. If...
Questions And Answers for 327P4
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fixed up somebody's old trimmer they threw at the curb
This trimmer was in relatively good shape. Somebody had thrown it out! They thought they had broke the rewind, but when I ended up taking it off, it sucked right back in. They also must have broke the vibration plate on the bottom. With the screws and plate I bought from here, plus a new head and service kit I got elsewhere , this thing ran like a champion again.
Jeremy from DILLSBURG, PA
Total Repair Time:15 - 30 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!