Models
>
31AH54Q6711
31AH54Q6711 Troy-Bilt Snow Blower - Overview
Models starting with 31AH54Q6711
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Shear Pin, .25
PartSelect #: PS9110822
Manufacturer #: 738-04124A
This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the...
$3.99
In Stock
Bow Tie Cotter Pin
PartSelect #: PS9096195
Manufacturer #: 714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a k...
$3.99
In Stock
Speed Selector Cable
PartSelect #: PS9166871
Manufacturer #: 946-04396A
This speed selector cable is sourced from the original manufacturer and consists of a cable enclosed in an outer protective casing. It connects the control panel to the transmission/drive system of th...
$19.72
In Stock
Nut, Flange Lock, 5/16-18, Grf
PartSelect #: PS9092936
Manufacturer #: 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant t...
$3.99
In Stock
Nut, Flange Lock, 3/8-16, Grf
PartSelect #: PS9095080
Manufacturer #: 712-04065
Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also...
$3.99
In Stock
Nut, Flange Lock, 1/4-20, Grf
PartSelect #: PS9299574
Manufacturer #: 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when pr...
$3.99
In Stock
Key
PartSelect #: PS9172543
Manufacturer #: 951-10630
This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approxim...
$6.64
In Stock
Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature m...
$9.91
In Stock
Worm Gear 20 T, 22"
PartSelect #: PS9165943
Manufacturer #: 917-04861
This is a worm gear that is designed for use within a variety of snowblowers and snowblower tractor attachments. The worm gear is used to rotate the auger through the drive mechanism, also known as th...
$41.34
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Steering Trigger on right side
If the trigger is broken on the left side, it is really easy to replace, if broken on the right side like mine the snow chute joystick control is in the way. Just remove the cover under the joystick and then the large nut under the joystick then you will be to push the joystick down giving you access to the pin that holds the steering tri
... Read more
gger.
Read less
Parts Used:
-
Jeffrey from MASSAPEQUA, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The chute rotation assembly was stuck
I ordered a replacement chute rotation gearbox. The small metal ball on the end of the cable (on the replacement part) was attached about 1/8" too long and made it so that there was too much play in the trigger that operates it. Thus, the replacement part did not work. I called customer service for directions about returning the part.
... Read more
They said it must have been defective. I'm still waiting for instructions about returning it for a refund. The whole thing was a bust. I ended up disassembling the old gearbox and fixing it, instead of replacing it (which would have been my preference). The replacement part did not work at all!
Read less
Parts Used:
-
Ralph from SALT LAKE CTY, UT
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!