Models
>
30-9200-00
30-9200-00 ((02)) Frigidaire Range - Overview
Sections of the 30-9200-00
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Drip Pan
PartSelect #: PS454077
Manufacturer #: 5303131115
This drip pan is designed for gas cooktops and ranges. The pan has an approximate diameter of 8 inches, and the hole in the middle has a diameter of roughly 4 inches. The purpose of this part is to ca...
$8.92
In Stock
Burner Grate
PartSelect #: PS437719
Manufacturer #: 316055800
This is a burner grate for your surface burner, and it is compatible with your range stove top. The purpose of this part is to provide a balanced and stable surface for you to set your cookware on whi...
$37.34
In Stock
Gas Oven Safety Valve
PartSelect #: PS468162
Manufacturer #: 5303912679
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
No Longer Available
Questions And Answers for 30-9200-00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 30-9200-00
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Very old burner grates & drip pans, need replacement.
Took out the old & easily replace it with the new set. No tools required.
Parts Used:
-
Mariano from Torrance, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
14 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original drip pans were rusting on the undersides
Just to point out the pans were delivered within a few days which was very quick. I just dropped them in. They fit perfect. Thank You for no stress.
Parts Used:
-
Sandra from Okeene, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven igniter glows but does not light.
I first unplugged the power cord and raised the range top and shut off gas supply to oven. then i removed the broiler drawer. Then using the adjustable wrench i loosened and removed the gas supply line from safety valve. Then using the philips head screw driver i removed the 2 screws holding the heat sheild surounding the valve. Then i u
... Read more
nplugged the 2 wires on the valve body. then i removed the 3 screws from valve bracket and removed the valve. Install in reverse order and adjust gas orfice for proper burner flame using adjustable wrench. takes about 30 mins. I have done this repair once befor so i kinda knew what i was doing from the get go!!!! I had the new part i had ordered from this site in just 3 days!!!
Read less
Parts Used:
-
Peter G from Pine River, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!