Models > 26274

26274 MTD Snow Blower - Overview

Models starting with 26274

Exact Part matches for your search term

[Viewing 6 of 6]
DISCONTINUED – Part Number: 26274
DISCONTINUED
This part number matches the current model number 26274
PartSelect #: PS70697
Manufacturer #: 26274
  No Longer Available
CET INDICATOR LIGHT PANE – Part Number: 26274
CET INDICATOR LIGHT PANE
This part number matches the current model number 26274
PartSelect #: PS4260126
Manufacturer #: 26274
  No Longer Available
Decal - "D" Handle Warning Decal – Part Number: 26274
Decal - "D" Handle Warning Decal
This part number matches the current model number 26274
PartSelect #: PS9467181
Manufacturer #: 26274
  No Longer Available
Decal - "D" Handle Warning Decal – Part Number: 26274
Decal - "D" Handle Warning Decal
This part number matches the current model number 26274
PartSelect #: PS11842451
Manufacturer #: 26274
  No Longer Available
Clip – Part Number: 26274
Clip
This part number matches the current model number 26274
PartSelect #: PS16319568
Manufacturer #: 26274
  No Longer Available
Saddle Plate – Part Number: 26274
Saddle Plate
This part number matches the current model number 26274
PartSelect #: PS16738086
Manufacturer #: 26274
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$3.77
  In Stock
Slide Shoe – Part Number: 784-5580-0637
Slide Shoe
PartSelect #: PS9135084
Manufacturer #: 784-5580-0637
This Slide Shoe is rated as "Easy" to install and requires a wrench set. It is a manufacturer-approved part that comes in black and is constructed of metal. The part is used to help the snowblower sli...
$22.16
  In Stock
Drive Clutch Cable 39.88 – Part Number: 946-0898
Drive Clutch Cable 39.88
PartSelect #: PS9170572
Manufacturer #: 946-0898
$23.91
  In Stock
Auger Clutch Cable – Part Number: 946-0897
Auger Clutch Cable
PartSelect #: PS9170571
Manufacturer #: 946-0897
$22.57
  In Stock
Wheel-Friction 4. – Part Number: 935-0243B
Wheel-Friction 4.
★★★★★
★★★★★
(1)
PartSelect #: PS9311064
Manufacturer #: 935-0243B
$16.75
  On Order
Fl-Wash 1.00" X 1.63" O.D. X 03 – Part Number: 936-0163
Fl-Wash 1.00" X 1.63" O.D. X 03
PartSelect #: PS9166464
Manufacturer #: 936-0163
This Flat Washer helps to spread load under a nut or bolt in a wide variety of lawn and garden equipment. Its dimensions are 1.00 inches x 1.63 inches O.D. x 03. This part is silver and made of metal,...   No Longer Available
Plastic Bushing .380 ID – Part Number: 941-0475
Plastic Bushing .380 ID
PartSelect #: PS9167515
Manufacturer #: 941-0475
This is an authentic OEM part for Craftsman lawn and garden equipment. This bushing has an internal diameter of 0.380", is made of durable black plastic, is not part of an assembly or kit, and is sold...
$3.65
  In Stock
Hex Flange Bearing – Part Number: 941-0245
Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
$8.86
  On Order
Bearing .62" I.D. x 1.38" O.D. x .437" Thk. – Part Number: 941-0155
Bearing .62" I.D. x 1.38" O.D. x .437" Thk.
PartSelect #: PS9167498
Manufacturer #: 941-0155
This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised ...
$21.60
  On Order
Worm Gear 20 T, 22" – Part Number: 917-04861
Worm Gear 20 T, 22"
PartSelect #: PS9165943
Manufacturer #: 917-04861
$36.96
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.20
  In Stock
Grease Benalene 920 8 Oz – Part Number: 737-0300A
Grease Benalene 920 8 Oz
PartSelect #: PS9119538
Manufacturer #: 737-0300A
$29.67
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Parts Used:
Shave Plate 26&#34
  • John from HARRISVILLE, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it does not make the slight howl sound.
Parts Used:
Grease Benalene 920 8 Oz
  • LISA M from BATESVILLE, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!