All Installation Instructions for Kenmore Refrigerator 25371822104

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaking Door Gasket

Open door remove old gasket, remove new one out of packaging install new gasket

Parts Used:

Refrigerator Door Gasket

Ulrich from Ontario, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

refrigerator door would not fully close

Took old gasket off and put new gasket into place. Part came in the mail in 2 days. Hardest part was finding the model number of the refrigerator.

Parts Used:

Refrigerator Door Gasket

Elizabeth from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the rail broke on the meat drawer holder

I removed the shelf that hold's the rail's then one (1) screw that hold's the rail in place then I replaced the shelf. Simple & Easy!!

Parts Used:

Drawer Support Rail - Right Side

Geronimo from McAllen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Gaskets needed replacing

I watched u-tube and did the same thing. It was simple.

Parts Used:

Refrigerator Door Gasket

Freezer Door Gasket

Claire Ellyn from Inverness, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker was not making ice

I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAIT OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!

Parts Used:

Replacement Ice Maker

Jeffrey from Indianapolis, IN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken drawer support and drawer'

Drawer support held in by one screw drawer slide in no problem

Parts Used:

Meat Pan

Drawer Support Rail - Right Side

Cameron from Bronx, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken meat drawer support

Took out the broken piece, replaced it with the new support using only a screwdriver, and VOILA, it was finished. Thanks!

Parts Used:

Drawer Support Rail - Left Side

Sue from Ocala, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer and refrigerator stopped cooling

The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.

Parts Used:

Run Capacitor

Amy from PITTSBURGH, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker failed

Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.

Parts Used:

Refrigerator Ice Maker Assembly

Mary from SOUTH LYON, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker stopped working

Took off old part and installed new part

Parts Used:

Water Inlet Valve

Fred from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

11 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door Shelf Was borken held together by duck tape

I receive the part the next day eventhough I paid for 3-5 day delivery. It took lest than 10 seconds to snap into place and now it looks like new.

Parts Used:

Refrigerator Door Shelf Bin

Letitia from OFallon, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

refrig. door fell off lower hinge

took door off to see damage / what caused it . put door back on with temporary fix. /
looked up parts online / ordered parts online.
received parts very quickly. removed doors again, put on repair parts , tested - ok now.

Parts Used:

Center Hinge Spacer