24A-452G729 MTD Chipper Shredder - Overview

Flail Blade The flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced. Installation is rated as "Easy" by customers and requires a ... Add to cart

Shoulder Pin, .5 X 2.625

★★★★★

★★★★★

(1)

This Shoulder Pin measures .5 X 2.625 is a 5x2.625, and is gold in color. The shoulder pin is used to fasten the flail blade onto the machine. Installation is rated as "Easy" and requires a hammer, pu...

Nut, Flange Lock, 3/8-16, Grf Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also... Add to cart

Jamlock Nut, 3/8-16 The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace... Add to cart

Chipper Blade The Chipper blade attaches to the impeller and is used for cutting. Installation is rated as "Easy" and requires pliers, a socket set, wrench set, and allen wrench set. A dull blade must be sharpened ...

Bell. Wash. .340 I.D. x .872 O.D. Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between variou... Add to cart

Washer-Lock 5/16 This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ... Add to cart

Screw-Flat Head Add to cart

Hopper Collar This is one of two sides (left and right). If you need both sides, you will need to order two of this part. Add to cart

Hex L-Nut 5/16-18 Thd. Add to cart

Push Cap The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down... Add to cart

3-Arm Thumb Scr. 5/16-18 x .75" Lg. Used for quick release of components, such as handles, this 3 Arm Thumb Screw is a manufacturer-sourced replacement part for hundreds of models of blowers and chippers. It is made of plastic and metal... Add to cart