Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 24588B0 > Instructions

24588B0 General Electric Range - Instructions

All installation instructions for 24588B0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 24588B0
301-315 of 373
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven heating unit had burned out

  • Customer: Joan from Billings, MT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Once I watched the video I realized how absolutely simple the whole repair would be. The information making sure the little clips did not slip back into the oven was quite helpful. I saved a minimum of $150.00 by completing the task myself. Thank you. Joan

Oven door wouldn't open without serious assistance

  • Customer: Leonard from Lake Stevens, WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
1. Google your appliance problem. 2. Watch whatever YouTube videos that are available. 3. Follow the excellent instruction provided by PartSelect.

bake element burned in half ( fourth time)

  • Customer: Thomas from Bradenton, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
took two screws out and unplugged wires. Had to curl up ends of element so they would short out. plugged wires back on new element and replaced mounting screws.

bake elemennt burned out

  • Customer: Terryl from Brooksville, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The part came in record time! All I needed to do was remove the old one taking out 2 screws and replace with the new element! Put 2 screws in and it was ready to go! Thank You for the super fast shipping!

Daughter Could Broil BUT Could Not Bake with the Oven

  • Customer: Joe from Burlington, CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Socket set
  • 0 of 0 people found this instruction helpful
The ~60 minute time frame resulted because of: Locating & Turning off the Circuit Breaker (40 amp) in the Electrical Panel Box to the Oven (EXTREMELY IMPORTANT FOR SAFETY); Removing the Old Bake Element; Using a OHM Meter to Check the "Continuity" of the Old Bake Element to make sure that it was defective; Ordering the New Unit from Parts Select; Installing the New Bake Element and Calibrating the Oven Temperature Settings with a New Oven Thermometer. This was done for Safety and Cooking Reasons to ensure that the Oven would not overheat and was heating correctly. OTHER REPAIR HINTS FYI: I had to use a 1/4" Socket with a Ratchet to remove the Screws which were "frozen" in place; Upon installing the same screws I found that a Portable Hand Held Electric Ratchet worked great because of the "Arm Stretch" into the Oven; I secured the Power Wires that attach to the Bake Element i.e. to prevent them from slipping into the Oven Wall by securing them in place with a "loop" of #14 Romex Wire; Lastly, using pliers, I "VERY Lightly" compressed the electrical Spade Connectors (Female) from the Power wires onto the Bake Element Male Connectors to make sure that the wires were secure and could not easily disconnect.

The range kept giving an F2 alarm

  • Customer: Les from Coal Creek, CO
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
When I got the part I removed the tin cover (two screws)on the back of the range. I removed the sensor by removing the two screws inside the oven and pulled out the sensor. taking the instructions advise, I checked the sensor with my ohm meter and although it read 1.1 ohms as compared with the recommended 1.09 ohms at room temperature in the instructions, went ahead and changed the unit. The connector did not fit my particular model so I spliced the wiring and using the two included wire nuts made the connection. I reinstalled the sensor, reattached the gas line, plugged it in and tried the oven before I put it back in place. The oven works great now and it was super easy.

Burned out Bake Element

  • Customer: Betty from Athelstane, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
This was my second time installing a new Bake Element, I am a 67 year old female, if I can do this anyone can. Used a pair of pliers, unscrewed screws pull out burned out element, release from wires, connected new bake element, pushed back in inserted screws...that easy all done.

Oven door difficult to open, would only open 4-5 inches

  • Customer: Thomas from Miami, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the video step by step, made the job simple and easy. Did not know there were springs attached to the lower part of hinge till watching video. Parts were genuine GE manufacturer parts which fit perfectly. Very helpful staff and great customer service. My model number did not match perfectly with others listed but the hinge part is identical.

Door hard to open and close

  • Customer: delbert from Auburn, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pull the door off the hinges. pull drawer out of range.Take sping off both frame and hinge arm. Unscrew three screws holing hinge in palce. pull old hinge out , put new hinge in . reinstall screws, spring, drawer , and door. Get the wife to make cookies.

Oven door wouldn't open/close properly; hinges offset & wheels broken

  • Customer: Bryan from Kentwood, MI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Followed YouTube video from PartsSelect. It was real easy to do and that video was helpful. Took off door by sliding it up off hinges, disconnected springs, unscrewed hinges & slid them out - reversed to install. Worked perfect, parts were exactly right and parts came within 2 days.

R had ight front control made loud noise when contacts opened.

  • Customer: James from Nashville, AR
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
  • 0 of 0 people found this instruction helpful
This is twin oven range with controls at side of upper oven. Control panel was fastened with screws at top and bottom. Range has built-in hood at top which had to be disassembled to reach top screw. Once had access to top screw, eaisly removed control panel and replaced control. New control had identical connections as old control so only had to install it, break shaft to correct length, and use proper shaft adapter for knob. Remounted control panel and range worked perfectly. This would have been a very quick job except for having to deal with the built-in range hood.

Plastic Insert for knob to long, had to use my bench grinder to cut it down

  • Customer: Floyd from Warren, OR
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
(Turn off the Power) Pull stove out, remove the 2 screws that holds switch in place, remove one wire at a time and install on new switch. Slip switch in replace 2 screws. Snap off about 3/4 of the shaft cut down plastic insert for knob, install knob turn on power and it works.

Bake Element Burned Out

  • Customer: Shane from Lenox, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
1. Turned off breaker (Important!) => 2. Removed two (2) metal screws from element mount (1/4" socket or nutdriver) => 3. Pulled element out enough to disconnect wire connections from element (I bent mine up a little to keep them from disappearing back into the holes!) => 4. Connected each wire to new element then re-installed element into position => 5. Re-installed to metal screws (Do not over tighten!) => 6. Turned breaker back on then turned on oven. Element heated up quickly! You may notice a slight smell of something burning when you first turn it on, but that's normal and will fade quickly. Repair completed and $$$ saved!

The element caught on fire

  • Customer: Kay from Villa Rica, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
My brother -in-law unscrewed the old one , lifted it out. Put the new one in , clicked the wires back in , and replaced the screws. Did it all in about 5 minutes with one tool. Super easy!!

Drawer guide

  • Customer: Lee from Grass Valley, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Used Phillips screw driver, installed guide, applied lubricant.
All Instructions for the 24588B0
301-315 of 373