Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JEFF
October 7, 2017
Does this part make the spin cycle work
For model number GST9679PB0
Hi Jeff,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the direct drive motor coupling, the agitator, the thrust spacer, the clutch assembly and the gearcase. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
July 3, 2019
Does it just rest on top of the agitator washer? Or does it actually clip on to something?
For model number LSQ9010LW0
Hello Jennifer, thank you for writing. This Agitator Clip for your model holds the bottom of the Agitator to the Spanner Nut part PS11738884 by attaching to it. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
February 25, 2023
What does the spanner nut the clip and the washer do?
For model number wtw5540sq0
Hello Joe, thank you for your question. This Agitator Clip PS11741195 for your model holds the bottom of the Agitator to the Spanner Nut PS11738884 which is a right hand threaded nut holds the tub in place in direct drive.
How is this part positioned on the plastic washer? Does the mouth of the clip face the vertical leg of the plastic washer?
For model number LSV7244AQ0
Hi Dave, thank you for the question. The metal clip and the plastic washer actually go under the agitator. The plastic washer leg goes into the opening in the drive block so when you set it down it sits flat, and the metal clip snaps onto the agitator shaft. The position of the metal clip can be in any direction. We hope this information is useful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
