Models
>
1542XP
1542XP (YTH 96013000101 -2005-01) Husqvarna Lawn Tractor - Overview
Sections of the 1542XP
[Viewing 10 of 10]_(2005-01)_WW_1.gif&Position=1&mfg=Husqvarna&Type=Lawn Tractor&Mark=1)
_(2005-01)_WW_2.gif&Position=2&mfg=Husqvarna&Type=Lawn Tractor&Mark=2)
_(2005-01)_WW_3.gif&Position=3&mfg=Husqvarna&Type=Lawn Tractor&Mark=3)
_(2005-01)_WW_4.gif&Position=4&mfg=Husqvarna&Type=Lawn Tractor&Mark=4)
_(2005-01)_WW_5.gif&Position=5&mfg=Husqvarna&Type=Lawn Tractor&Mark=5)
_(2005-01)_WW_6.gif&Position=6&mfg=Husqvarna&Type=Lawn Tractor&Mark=6)
_(2005-01)_WW_7.gif&Position=7&mfg=Husqvarna&Type=Lawn Tractor&Mark=7)
_(2005-01)_WW_8.gif&Position=8&mfg=Husqvarna&Type=Lawn Tractor&Mark=8)
_(2005-01)_WW_9.gif&Position=9&mfg=Husqvarna&Type=Lawn Tractor&Mark=9)
_(2005-01)_WW_10.gif&Position=10&mfg=Husqvarna&Type=Lawn Tractor&Mark=10)
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw
In Stock
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.81
Ring Klip Number T5304-75
In Stock
PartSelect #: PS9143890
Manufacturer #: 812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It i...
$3.81
Washer 25/32 x 1-1/4 x 16 Ga.
In Stock
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.81
Cap Axle Black 1 50 x 1 00
In Stock
PartSelect #: PS9007667
Manufacturer #: 532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of ...
$3.81
Blade Mower
In Stock
PartSelect #: PS9286056
Manufacturer #: 532138971
This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over ...
$15.28
Washer Hardened
In Stock
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$5.09
Questions And Answers for 1542XP
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 1542XP
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
-
Anthony from OLIVEHILL, TN -
Difficulty Level:Easy -
Total Repair Time:15 - 30 mins -
Tools:Pliers, Screw drivers
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the bent blades on my riding mower.
- Made the mower safe to work on the blades (remove spark plug wires, etc.)
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.
- Raised the mower to get access to the blades, wedged a wood block against the blade.
- Used impact driver with socket to remove bolt holding blade.
- Removed blade, replaced with new, replaced bolt and tightened with impact driver, ..... and you know the rest.
Parts Used:
-
Trace from LISLE, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken v-belt for drive
I returned the belt because it was the wrong part. Ordered the correct belt from another source. After that the replacement went well and I crossed off Parts Select from my list.
Parts Used:
-
Paul from ROCKTON, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
