Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 1500PAA > Instructions

1500PAA Magic Chef Range - Instructions

All installation instructions for 1500PAA parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 1500PAA
16-30 of 117
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner no longer worked.

  • Customer: Marcus from Emmett, KS
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
First I removed a screw that held the element in place then disconnected the two wires . Then I just reattached the two wires put the screw back in place and was done in about 10 minutes. Fairly easy fix, I had this go out a few years ago and had a repairman fix it, and saw how easy it was, so this time I did it myself. Easy job!!

burner receptacle burned out

  • Customer: Michael from N. Haverhill, NH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
Worst part of the job was removing the old screws that held the two old rectecles in place for the two burners I repaired. Once the screws were removed cut the wires stripped them and used the porceliean wire nuts provided with the kit. Easy job and good instructions.

Burner wouldn't heat (wiring failure)

  • Customer: Eugene from San Antonio, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 3 of 4 people found this instruction helpful
1. Shut the breaker off; Jenn-Air's design will have you working around hot leads if you don't.
2. Raise the control panel
3. Remove burner and unscrew the burner connector; trace the wires back to the control panel bottom and remove them
4. On the replacement connector, add the electrical for the control panel. These are not included and can be found at any hardware store; they are a standard size.
5. Connect the new wires and put everything back together.
6. Reset the break and test.

piece of cake. The pictures with the grid background on your website gave me ability to verify what I was purchasing.

  • Customer: George from Irving, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
This is the second use of Parts Select. First time was for another obscure part for an old microwave, which also worked out VERY well. Both appliances still in action.

needed to replace stove pans and burner

  • Customer: Marylou from Sitka, AL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 6 people found this instruction helpful
An easy replacement job.

Service from you was prompt and the replacement parts arrived in perfect condition...thanks

burner would not heat.

  • Customer: Jackie from Hughes Springs, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I unpluged the old burner and pluged the new one in. Repair done in about 2 min,

replacing old drip bowls

  • Customer: Marion J. from Palmetto, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.

ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.

  • Customer: RICHARD from SHOW LOW, AZ
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Stuck the new one into the plugin.

Drip Pans were stained and burned on.

  • Customer: Sandra Collignon from SANTA CLAUS, IN
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.

Burner plugs were loose

  • Customer: James from CONCORD, NC
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set
  • 1 of 1 people found this instruction helpful
used the supplied parts...very easy. The parts were exact replacements.

baking calrod not working. Replaced part with exact replacement part

  • Customer: Danny from GREENSBORO, NC
  • Difficulty: Very Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 1 of 1 people found this instruction helpful
1. Turn off power. 2. Unscrew rod in rear of stove. 3. Remove wires connected to rod. 4. Connect wires to new rod. 5.Screw rod to stove. 6. Turn on power. 7.Allow to heat until red. It will smoke slightly burning off the protective coating. Now it is perfect. .

Drip pans were old and with burnt on food that I couldn't get off. Disgusting!!

  • Customer: Nicki from ELSIE, NE
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
No problem Took off old ones and replaced with new.

Drip pans needed to be replaced

  • Customer: Mark from ROSENBERG, TX
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
1) removed heating elements. 2) removed drip pans. 3) installed new drip pans. 4) reinstalled heating elements

Drip pans were not original to range, I could not get them clean.

  • Customer: Lynn from BRADENTON, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
I reoved old drip pans and installed new ones. Very easy, they look great!

Jennair cooktop with coils lost one of its coil guides.

  • Customer: Bruce from SOUTHBURY, CT
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 1 of 1 people found this instruction helpful
We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.
All Instructions for the 1500PAA
16-30 of 117