Models
>
15006S
15006S Troy-Bilt Tiller - Overview
Models starting with 15006S
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Left Hand Bolo Tine
PartSelect #: PS9455672
Manufacturer #: 742-04227-0637
This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to in...
No Longer Available
Right Hand Bolo Tine
PartSelect #: PS9455670
Manufacturer #: 742-04226-0637
The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its i...
No Longer Available
Forward Idler Pulley
PartSelect #: PS9457633
Manufacturer #: 756-04170
This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part ...
No Longer Available
Keyed Washer 1.0 X 0.38 X 0.37
PartSelect #: PS9455313
Manufacturer #: 736-04445
No Longer Available
Bushing-Spacer, 19/64" (.300")
PartSelect #: PS9463213
Manufacturer #: GW-1113-1099
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
Remove tensioner, 1 nut
Slide old tensioner off and replace
Parts Used:
-
Gary from ELGIN, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1inch shaft and wheels have to be removed first.
Wheels had to be cut off of the axle in order to get to the seals. The center of wheel is 3in wide and axle isn't tappered on troy bilt pony model wheels where rusted on.
Parts Used:
-
Norman from RAINIER, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!